- Edmonton Stock: 1
:
from
to
Clear
Clear
Wire Guard · 16 x 22 in Fit · White · For Linear HBL High Bay · NaturaLED WG-HBL22/WH
SKU: WG-HBL22/WH
White wire guard accessory for compatible NaturaLED linear HBL high bay fixtures with a 16 x 22 in form factor. Used to help protect the fixture from impact and debris in warehouses, commercial spaces, and other busy indoor areas while maintaining light output.
What this product is for
This wire guard is an accessory for compatible NaturaLED linear HBL high bay fixtures. It adds a physical barrier in front of the fixture to help reduce damage from incidental impact, stored materials, carts, and airborne debris in active indoor spaces.
Use for
Use for 16 x 22 in (approximately 406 x 559 mm) NaturaLED linear HBL high bay fixtures where added fixture protection is needed. Common applications include warehouses, factories, service areas, and commercial garages.
Avoid for
Avoid using this accessory on non-compatible fixture sizes or unrelated high bay series. Do not assume universal fit across all 2 ft high bay fixtures; confirm the matching NaturaLED HBL housing before ordering.
Best for
Best for indoor commercial and industrial installations where fixtures may be exposed to occasional contact from ladders, lifts, stock handling, or routine maintenance activity. It is a practical choice when reducing lens damage and service calls is a priority.
Installed in
Typically installed on compatible linear high bay luminaires in warehouses, manufacturing areas, back-of-house commercial spaces, and similar indoor environments. Typical guidance: wire guards are commonly added in higher-traffic zones rather than every aisle. Actual need depends on mounting height, traffic patterns, and site conditions.
Why this product exists
Linear high bay fixtures in working environments can be exposed to accidental impact and debris. This accessory is intended to extend fixture service life and help reduce maintenance related to damaged lenses or housings without significantly obstructing light distribution.
Compared with similar products
Compared with a bare fixture, a wire guard adds front-face protection but must be matched to the correct fixture size. This model is identified by NaturaLED as a white wire guard for the 16 x 22 in HBL format and is sold as a separate accessory rather than an integrated fixture component.
Specifications
- Brand: NaturaLED
- Manufacturer part number: WG-HBL22/WH
- Order code: P10094
- Product type: Wire guard / protective fixture accessory
- Compatible fixture family: NaturaLED linear HBL high bay
- Nominal fit size: 16 x 22 in (approximately 406 x 559 mm)
- Finish: White
- Application: Indoor commercial and industrial high bay protection
- Installation note: Accessory for compatible fixture only
- Package quantity: 1
- Warranty: 5 years
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.