:
from
to
Clear
Clear
Wall Mount Kit · For Votatec Architectural Linear Fixtures · 2 ft/4 ft/8 ft Compatible · Votatec LI-J-B001
SKU: LI-J-B001
Wall mount kit for Votatec Architectural Linear fixtures, listed as compatible with 2 ft, 4 ft, and 8 ft fixture lengths. Used where the linear fixture needs a fixed wall-mounted installation instead of the standard suspended setup; confirm finish, hardware contents, and fixture compatibility before ordering.
What this product is for
The LI-J-B001 is a wall mount kit for Votatec Architectural Linear fixtures. It is used to adapt compatible linear fixtures for wall-mounted installation in commercial, institutional, and architectural interior lighting layouts.
Use for
Use for mounting compatible Votatec Architectural Linear fixtures on walls in corridors, offices, lobbies, retail spaces, and similar indoor applications. Manufacturer literature lists this accessory for 2 ft, 4 ft, and 8 ft fixture formats.
Avoid for
Avoid using this kit with non-compatible fixture families, unsupported lengths, or where a suspended, recessed, or surface-mount installation is required instead. If the project depends on a specific stand-off, aiming angle, finish, or included hardware set, verify those details before purchase.
Best for
Best for projects using Votatec Architectural Linear luminaires where a clean wall-mounted presentation is needed. This is typically selected when the fixture family is already specified and the installer needs the matching accessory rather than a field-fabricated bracket solution.
Installed in
Typically installed in indoor commercial and institutional spaces such as hallways, reception areas, meeting rooms, education spaces, and retail environments. Final suitability depends on the fixture configuration and site conditions.
Why this product exists
Votatec offers the Architectural Linear family with multiple mounting methods, including suspended, surface, and wall-mounted options. This kit exists to provide a manufacturer-matched wall mounting method for compatible fixtures in that series.
Compared with similar products
Compared with generic brackets, a manufacturer-specific wall mount kit helps maintain compatibility with the intended fixture family and supported lengths. Compared with suspended mounting hardware, this accessory is intended for fixed wall installations. As a typical buying check, contractors should confirm the exact fixture series, length, finish, and whether mounting hardware is included with the accessory or supplied separately.
Typical guidance only: accessory requirements can vary by fixture generation and project layout. Actual fit and installation depend on the luminaire configuration and manufacturer instructions.
Specifications
- Product type: Wall mount kit accessory
- Brand: Votatec
- Manufacturer part number: LI-J-B001
- Fixture family: Votatec Architectural Linear
- Compatible fixture lengths: 2 ft, 4 ft, 8 ft (approximately 610 mm, 1.2 m, 2.4 m)
- Application: Indoor architectural linear fixture wall mounting
- Mounting category: Accessory ordered separately
- Installation note: Confirm compatibility with the exact fixture configuration before ordering
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Emergency Remote Head · 2 x 7W · Double Head · Etlin Daniels ER270DWH-UD14
ER270DWH-UD14
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse38 – Loyalty Rewards
