1200 lm LED Landscape Accent Light · 14.3W 3000K 55° Beam · 120-277V Bronze Finish · Kichler 16217AZT30
What this product is for
This integrated LED landscape accent light is used for wide-beam uplighting and accent lighting in residential and light commercial exterior applications. It suits larger planting beds, trees, stonework, signage, and building features where a broader 55° beam is preferred over a narrow spotlight.
Use for
Use for illuminating wider landscape features, washing textured walls, and highlighting larger shrubs or trees. The 120-277V input makes it suitable for line-voltage installations where a separate low-voltage transformer is not required.
Avoid for
Avoid using this fixture where a tight beam is needed for long-throw spotlighting, very narrow columns, or precise feature highlighting. It is also not the right choice where a replaceable lamp fixture is required, since this is an integrated LED unit.
Best for
Best for contractors and maintenance teams specifying a line-voltage accent fixture with broad beam coverage, wet-location rating, and built-in surge protection. A 55° beam is typically chosen when you want softer edge definition and wider coverage than a narrow accent fixture.
Installed in
Installed in landscape beds, around commercial entries, along building perimeters, and in exterior architectural lighting layouts. Typical installations include ground mounting near trees, façade elements, and signage zones in wet outdoor locations.
Why this product exists
This model fills the need for a higher-output large accent fixture that runs directly on 120-277V power and delivers warm 3000K light for exterior environments. It helps simplify line-voltage landscape and architectural lighting layouts while providing broader beam control than narrow spot options.
Compared with similar products
Compared with narrower beam accents, this 55° version spreads light over a wider area with less concentrated centre intensity. Compared with low-voltage landscape fixtures, it is intended for line-voltage systems and is commonly selected for commercial or larger-scale exterior projects. As a rule of thumb, wider beam fixtures are often better for broader canopies and wall surfaces, while narrower beams are better for punch and distance. Actual performance depends on aiming, setback, ambient light, and installation conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 16217AZT30
- Product family: C-Series
- Product type: Large integrated LED landscape accent light
- Light output: 1200 lm
- Wattage: 14.3W
- Colour temperature: 3000K
- Beam spread: 55°
- Voltage: 120-277V AC, 50/60 Hz
- Efficacy: approximately 84 lm/W
- CRI: 80+
- Average life: 40,000 hours
- Location rating: Wet location
- Ingress protection: IP66
- Surge protection: Built-in
- Housing material: Aluminium
- Finish: Textured architectural bronze
- Dimensions: 8-1/2 in L x 3-3/4 in W x 6-1/2 in H (approximately 216 x 95 x 165 mm)
- Volts120-277
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.