473 lm Small Accent Light · 10W LED · 15° Beam · 120V-277V · Textured Architectural Bronze · Kichler 16212AZT30
What this product is for
This Kichler C-Series small accent light is a line-voltage outdoor spotlight for focused landscape and architectural lighting. It uses an integrated 10W LED, delivers approximately 473 lumens, and projects a narrow 15° beam for precise highlighting of features rather than broad wash lighting.
Use for
Use for spotlighting columns, stonework, signs, entry features, sculptures, smaller trees, and other details where a tight beam is preferred. The 3000K light suits warm residential and light commercial exterior applications, and the 120V-277V input range can simplify specification across different site power conditions.
Avoid for
Avoid using this fixture where wide flood coverage is needed across planting beds, walls, or large canopies. A 15° beam is intended for concentrated accenting, so it is not the best choice for general area lighting or broad façade washing.
Best for
Best for contractors and landscape installers who need a compact, line-voltage accent fixture with a narrow beam and bronze finish for coordinated outdoor installations. It is also a practical fit where integrated LED performance and built-in surge protection are preferred over lamp-based fixtures.
Installed in
Typically installed in landscape beds, around walkways, at building perimeters, and in commercial exterior accent applications. Common mounting locations include grade-level aiming positions and feature-lighting layouts where a small fixture body is easier to conceal.
Why this product exists
This product exists to provide a tighter, more controlled beam than a flood light, helping installers place light on a specific object with less spill. As a rule of thumb, narrow-beam accent fixtures are commonly chosen when the goal is emphasis and contrast rather than uniform coverage. Actual performance depends on installation conditions, aiming, spacing, and local electrical code.
Compared with similar products
Compared with wider 40° or 55° accent fixtures in the same family, this 15° version gives a more concentrated centre beam for longer throws or smaller focal points. Compared with low-voltage landscape fixtures, this model is a line-voltage option intended for 120V-277V systems and may suit projects where a transformer is not part of the design.
Specifications
- Brand: Kichler
- Manufacturer part number: 16212AZT30
- Product family: C-Series
- Product type: Small landscape accent light / spotlight
- Light source: Integrated LED
- Delivered light output: approximately 473 lm
- Wattage: 10W
- Beam spread: 15°
- Colour temperature: 3000K
- Input voltage: 120V-277V
- Finish: Textured Architectural Bronze
- Location rating: Wet location
- Protection: Built-in surge protection
- Application: Outdoor landscape and architectural accent lighting
- Volts120-277
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.