300 lm LED landscape spot light · 2700K · 10° beam, textured black, 12V · Kichler 16153BKT27
What this product is for
This Kichler integrated LED landscape spot light is designed for low-voltage 12V outdoor accent lighting where a narrow beam is needed. It delivers 300 lumens of 2700K warm white light through a 10° beam for controlled highlighting of landscape and architectural features.
Use for
- Uplighting small trees, specimen plantings and shrubs
- Highlighting stone, columns, signs and façade details
- Creating tight beam accents in residential and light commercial landscape systems
- Warm white lighting schemes that need a softer 2700K appearance
Avoid for
- Wide-area wash lighting where a flood beam is required
- Applications where a replaceable lamp fixture is preferred for future lamp changes
- Long low-voltage runs without checking voltage drop
Best for
Best for installers who need a compact integrated LED accent fixture with a narrow 10° beam and textured black finish for discreet daytime appearance. A 10° beam is typically chosen for precise highlighting rather than general spread lighting.
Installed in
Typically installed in 12V landscape lighting systems in gardens, walkways, planting beds, building perimeters and outdoor amenity spaces. Commonly paired with low-voltage cable and a landscape transformer sized to the connected load. As a rule of thumb, transformer sizing is typically calculated at approximately 125% of total fixture wattage, and voltage drop should typically be kept to 10% or less. Actual performance depends on cable length, conductor size, layout and local electrical code.
Why this product exists
This fixture exists for applications where a standard flood spread would put too much light outside the target area. The narrow beam helps direct light onto a specific feature while limiting spill, and the integrated sealed LED design reduces routine lamp replacement.
Compared with similar products
Compared with wider 35° or 60° landscape accents, this 10° version is better suited to tighter focal points and longer throw accenting. Compared with replaceable-lamp fixtures, this integrated LED model offers a sealed construction and simplified maintenance profile, but it does not use a field-replaceable lamp.
Specifications
- Type: Integrated LED landscape accent / spot light
- Brand: Kichler
- Manufacturer part number: 16153BKT27
- System voltage: 12V low voltage
- Light output: 300 lm
- Colour temperature: 2700K warm white
- Beam spread: 10°
- Finish: Textured black
- Construction note: Integrated, fully sealed LED fixture
- Surge protection: 4,000V
- Application: Outdoor landscape accent lighting
- Volts12
- Watts3.5W
- FinishTextured Black
- Light SourceLED
- Lumens300
- LED Color Temperature2700K
- CRI80
- Rated Life50,000hrs
- Beam Angle10°
- MountingStake
- Diameter3.2"
- Length4"
- Height5"
- RatingsIP66
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.