200 lm Landscape LED Spot Light · 3000K 10° Beam 12V · Textured Black · Kichler 16150BKT30
What this product is for
This Kichler 12V landscape LED spot light is used for focused outdoor accent lighting where a narrow beam is needed. With 200 lumens, 3000K light colour, and a 10° beam spread, it suits highlighting smaller trees, columns, signs, stone features, and architectural details.
Use for
Use for low-voltage landscape lighting systems, precision uplighting, and controlled accent lighting in residential and light commercial exterior projects. A 10° beam is typically chosen when electricians or landscape contractors want a tighter punch of light with less spill than a flood beam.
Avoid for
Avoid using this fixture where broad area coverage, pathway lighting, or wall washing is required. It is not the right choice when a wider beam is needed to cover large shrubs, facades, or open planting beds.
Best for
Best for installations that need a compact integrated LED accent fixture in a black finish, especially where beam control matters more than wide coverage. It is also a practical choice where surge protection and a sealed fixture design are preferred in outdoor environments.
Installed in
Installed in 12V landscape lighting systems in gardens, entrances, planting beds, around hardscape features, and along building perimeters. The fixture size is approximately 3.25 in W x 4.5 in H x 3.5 in L (83 x 114 x 89 mm), which helps when planning stake-mounted or surface-mounted aiming locations.
Why this product exists
This product exists to deliver a controlled accent beam from a compact low-voltage fixture without requiring a replaceable lamp. The integrated, fully sealed LED design helps reduce maintenance points, while the custom optics are intended to improve centre-to-edge uniformity. It also includes 4,000V surge protection for added resilience in outdoor lighting systems.
Compared with similar products
Compared with wider flood versions, this 10° spot provides a tighter, more concentrated beam for feature lighting. Compared with replaceable-lamp landscape fixtures, an integrated LED unit can simplify maintenance planning, but the light source is not field-swappable. As a rule of thumb, narrow-beam fixtures like this are commonly used for smaller focal points or where precise aiming is more important than broad coverage. Actual performance depends on installation conditions, aiming, distance, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 16150BKT30
- Product type: Landscape LED accent spot light
- System voltage: 12V
- Light output: 200 lm
- Colour temperature: 3000K
- Beam angle: 10° spot
- Input power: 2.5 W
- Fixture type: Integrated, fully sealed LED
- Finish: Textured Black
- Material: Aluminium
- CRI: 80
- Rated life: 40,000 hours
- Surge protection: 4,000V
- Location rating: Wet location
- Dimensions: 3.25 in W x 4.5 in H x 3.5 in L (83 x 114 x 89 mm)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.