182 lm LED Path Light · 3000K · Round Tiered Textured Black · Kichler 16124BKT30
What this product is for
This 12V low-voltage path light is used to illuminate walkways, garden paths, planting beds, and landscape edges with warm white 3000K light. The round tiered shade creates a decorative downward spread suited to residential and light commercial landscape lighting layouts.
Use for
Use for pathway guidance, garden accents, landscape borders, and outdoor areas where glare control and a softer spread pattern are preferred. It fits Kichler 12V landscape systems and is commonly selected where a black fixture blends into mulch beds, shrubs, or hardscape edges.
Avoid for
Avoid using this fixture where a replaceable lamp is required for future field servicing, or where higher-output area lighting is needed. It is not the right choice for flood lighting, tall tree uplighting, or line-voltage 120V installations without the correct low-voltage transformer.
Best for
Best for contractors and homeowners looking for a compact decorative path light with integrated LED output, 3000K colour temperature, and a textured black finish. It is well suited to coordinated Kichler landscape lighting projects.
Installed in
Typically installed in soil or landscaped beds beside paths, sidewalks, and garden transitions. The fixture stands approximately 21 in (533 mm) high with an 8 in (203 mm) diameter shade, making it suitable for standard path-light spacing in residential landscapes.
Why this product exists
This product exists to provide low-voltage pathway illumination with a decorative tiered shade and integrated LED source, reducing lamp replacement compared with older lamped path lights. For many layouts, path lights around this height are typically used to create comfortable guidance lighting rather than broad area coverage.
Typical guidance only: path lights around 18 to 21 in (457 to 533 mm) are commonly used to create an approximate 8 ft (2.4 m) pool of light depending on spacing, mounting location, beam control, and surrounding surfaces. Actual performance depends on installation conditions, layout, voltage drop, and local electrical code.
Compared with similar products
Compared with higher-output path lights, this model is intended more for decorative pathway lighting than wide-area illumination. Compared with replaceable-lamp low-voltage fixtures, the integrated LED design can reduce maintenance, but the light source is not field-swappable like a lamped fixture. In low-voltage landscape systems, a typical rule of thumb is to size the transformer at total fixture wattage multiplied by 1.25 and keep voltage drop to 10% or less for more consistent output. Actual system performance depends on cable length, conductor size, and loading.
Specifications
- Brand: Kichler
- Manufacturer part number: 16124BKT30
- Product type: LED path light
- System voltage: 12V low voltage
- Light output: 182 lumens
- Colour temperature: 3000K
- Power: 2W
- Efficacy: 48 lm/W
- CRI: 80
- Finish: Textured Black
- Material: Cast aluminium
- Approximate height: 21 in (533 mm)
- Approximate diameter: 8 in (203 mm)
- Application: Path and spread landscape lighting
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.