250 lm Path Light · 12V · 3000K · Textured Black · Kichler 16120BKT30
What this product is for
This low-voltage integrated LED path light is used to illuminate walkways, garden edges, planting beds, and outdoor circulation areas. It provides a warm 3000K light output in a textured black finish for residential and light commercial landscape lighting layouts.
Use for
Use for pathway definition, garden bed lighting, front entry approaches, and perimeter landscape lighting on 12V systems. It is commonly selected where contractors want a simple path-and-spread fixture with integrated LED performance and a wet-rated outdoor design.
Avoid for
Avoid using this fixture where a replaceable lamp platform is required for future field servicing, or where a directional accent, flood, or tree-mounted fixture would be more appropriate than a path light. It is not intended to replace line-voltage area lighting.
Best for
Best for low-voltage landscape projects needing approximately 250 lumens, 3000K warm white light, and a clean 21 in (533 mm) path light profile. It suits walkways, softscape borders, and exterior residential projects where a black fixture blends into darker landscape finishes.
Installed in
Typically installed in soil or landscaped areas beside sidewalks, stone paths, mulch beds, and garden borders. As a rule of thumb, path lights around 18 to 24 in high are commonly used to create overlapping pools of light along a walkway rather than wide-area illumination. Actual performance depends on fixture spacing, beam distribution, transformer loading, cable run length, and local electrical code.
Why this product exists
This fixture exists to provide straightforward low-voltage path lighting with integrated LED efficiency, warm white output, and a weather-suitable aluminium housing. It gives contractors a simple option for adding wayfinding and ambient landscape light without moving to a larger decorative or accent fixture.
Compared with similar products
Compared with higher-output or larger decorative path lights, this model is a simpler fundamentals-style fixture for standard path-and-spread applications. Compared with replaceable-lamp landscape fixtures, the integrated LED design reduces lamp replacement but does not offer the same field-service flexibility. For longer cable runs in low-voltage systems, voltage drop should still be considered; a common rule of thumb is to target 10% voltage drop or less.
Specifications
- Brand: Kichler
- Manufacturer part number: 16120BKT30
- Product type: Landscape path light
- Series / family: Fundamentals / 16120 series
- Voltage: 12V low voltage, operating range 9-15V
- Light source: Integrated LED
- Wattage: 3W
- Light output: 250 lm
- Colour temperature: 3000K
- CRI: 80
- Finish: Textured Black
- Material: Aluminium
- Dimensions: 21 in H x 6 in dia. (approximately 533 mm H x 152 mm dia.)
- Location rating: Wet rated
- Application: Exterior landscape lighting
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.