250 lm Path Light · 12V · 2700K Integrated LED · Textured Architectural Bronze · Kichler 16120AZT27
What this product is for
This low-voltage landscape path light is used to illuminate walkways, garden edges, planting beds, and outdoor living areas with a warm 2700K light output. It is a wet-rated integrated LED fixture for 12V landscape lighting systems.
Use for
Use for residential paths, front entries, garden borders, and light commercial landscape applications where a softer warm-white appearance is preferred. It suits installations using a 12V landscape transformer and is commonly selected where a simple architectural look is needed.
Avoid for
Avoid using this fixture where a replaceable lamp is required for future field servicing, or where a higher-output path or area light is needed for wider spacing. It is not intended for line-voltage 120V installation without the correct low-voltage transformer.
Best for
Best for contractors and landscape installers who need a warm 2700K path light in textured architectural bronze with integrated LED performance and wet-location suitability. It is also a fit for projects matching other Kichler landscape fixtures in the Fundamentals family.
Installed in
Typically installed along sidewalks, stone paths, mulch beds, and perimeter landscape runs in homes, condos, and small commercial properties. The fixture is approximately 21 in H x 6 in dia. (533 mm x 152 mm), which suits standard path-light layouts.
Why this product exists
This product provides a straightforward low-voltage path-lighting option for projects that need warm ambient guidance lighting rather than high-output area lighting. As a rule of thumb, path lights of this size are commonly spaced so light patterns slightly overlap for more even walkway coverage. Actual spacing depends on mounting layout, surrounding surfaces, and desired light levels.
Compared with similar products
Compared with replaceable-lamp landscape fixtures, this integrated LED model reduces lamp-change maintenance but does not offer a field-swappable lamp. Compared with cooler 3000K path lights, the 2700K output gives a warmer residential look that is often preferred around gardens, entries, and outdoor seating areas.
Specifications
- Brand: Kichler
- Manufacturer part number: 16120AZT27
- Product type: Landscape path light
- Family/collection: Fundamentals / CBR LED Integrated
- System voltage: 12V
- Light source: Integrated LED
- Colour temperature: 2700K
- Light output: 250 lm
- Wattage: 3W LED, 4.3W system wattage reported by some distributors
- CRI: 80
- Finish: Textured Architectural Bronze
- Material: Aluminium
- Rating: Wet location
- Operating voltage: 9-15V
- Dimensions: 21 in H x 6 in dia. (533 mm x 152 mm)
- UPC: 783927473910
Typical low-voltage guidance: for longer cable runs, voltage drop should typically be kept to 10% or less. Actual performance depends on transformer sizing, cable length, load, and installation conditions.
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.