43 lm Deck Light · 12V · 3000K · Textured Architectural Bronze · Kichler 16110AZT30
What this product is for
This low-voltage deck light is designed for surface mounting on deck rails, posts, steps and patio structures where a compact fixture is needed for accent lighting and safer navigation. It uses an integrated LED light source with 3000K warm white output and a textured architectural bronze finish.
Use for
Use for deck perimeters, stair transitions, rail sections, outdoor seating areas and other residential or light commercial landscape lighting applications using a 12V system. It is suitable for wet locations and operates on 9-15V, which helps when working with typical low-voltage landscape lighting runs.
Avoid for
Avoid using this fixture where higher-output path, flood or area lighting is required. It is not intended to replace a path light or spotlight where broader beam spread or longer throw is needed.
Best for
Best for contractors and installers who need a small deck light with warm white output, a finished architectural look and compatibility with standard 12V landscape systems. This style is commonly selected for subtle step and rail illumination rather than primary area lighting.
Installed in
Typically installed on wood or composite deck rails, stair stringers, post details and patio structures. The fixture body measures approximately 3.25 in W x 2.5 in H x 1.94 in L (83 x 64 x 49 mm), which suits tighter mounting locations.
Why this product exists
This product exists to provide compact, low-glare deck and patio lighting in a low-voltage format that is easier to integrate into landscape lighting layouts. For deck applications, smaller low-lumen fixtures are typically used to mark edges and improve visibility without overpowering the space.
Rule of thumb: low-voltage deck lights like this are commonly spaced by layout and visual effect rather than by a strict formula. Actual performance depends on installation conditions, mounting position, transformer loading, wire run length and local electrical code.
Compared with similar products
Compared with larger hardscape or undercap fixtures, this deck light is more compact and lower output, making it better suited to close-range accent and wayfinding use. Compared with replaceable-lamp landscape fixtures, this model uses an integrated LED source, which simplifies fixture selection but does not offer lamp replacement as a separate maintenance item.
Specifications
- Brand: Kichler
- Manufacturer part number: 16110AZT30
- Product family: Fundamentals
- Product type: LED deck light
- System voltage: 12V low voltage
- Operating voltage: 9-15V
- Light source: Integrated LED
- Colour temperature: 3000K
- Light output: 43 lumens
- Finish: Textured Architectural Bronze
- Location rating: Wet location
- Dimensions: 3.25 in W x 2.5 in H x 1.94 in L (83 x 64 x 49 mm)
- Application: Decks, rails, steps, patios
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.