41 lm Deck Light · 12V · 2700K · Textured Architectural Bronze · Kichler 16110AZT27
What this product is for
This 12V low-voltage LED deck light is designed for post, rail and deck-mount applications where you need soft marker light for safety, wayfinding and perimeter definition. It uses an integrated LED light source with a warm 2700K colour temperature and a textured architectural bronze finish suited to outdoor residential and light commercial landscape projects.
Use for
- Deck posts and guard rails
- Stair transitions and step-edge marker lighting
- Patio perimeters and outdoor living areas
- Low-voltage landscape lighting systems operating at 9-15V, nominal 12V
Typical guidance: low-output deck lights like this are commonly used for accent and safety marking rather than area lighting. Actual performance depends on installation conditions, spacing, mounting height and local electrical code.
Avoid for
- Applications requiring broad pathway or area illumination
- Projects where a replaceable lamp is required for future field servicing
- Line-voltage 120V installations without a suitable low-voltage transformer
Best for
Best for electricians and landscape contractors specifying a compact, low-profile deck light for warm ambient illumination on decks, fences, rails and outdoor gathering spaces. The 41 lm output is better suited to visual guidance and accenting than primary lighting.
Installed in
Commonly installed on wood or composite deck structures, post sleeves, rail faces and similar exterior mounting surfaces. The fixture is approximately 3.25 in W x 2.5 in H x 1.94 in L (83 x 64 x 49 mm), helping it fit tighter deck and rail details.
Why this product exists
This product provides a simple low-voltage deck-lighting option where the goal is to improve visibility and define edges without adding glare. The integrated LED design reduces lamp replacement frequency compared with older miniature lamp deck lights, while the wet rating supports exposed outdoor use.
Compared with similar products
Compared with higher-output hardscape or path lights, this deck light is intended for close-range accent and safety lighting. Compared with replaceable-lamp fixtures, the integrated LED format simplifies the fixture design but does not offer field lamp changes. For larger decks or brighter walking surfaces, contractors typically combine deck lights with path lights or step lights for more complete coverage.
Specifications
- Brand: Kichler
- Manufacturer part number: 16110AZT27
- Product family: Fundamentals
- Product type: Low-voltage LED deck light / post and rail deck light
- Light output: 41 lm
- Colour temperature: 2700K, warm white
- Voltage: 12V low voltage, operating range 9-15V
- Integrated LED: Yes
- Input wattage: 0.86 W max
- System wattage listing: 2.5 W appears on some distributor listings
- CRI: 80 typical
- Finish: Textured Architectural Bronze
- Material: Aluminium / cast aluminium
- Rating: Wet location, cETLus listed
- Dimensions: 3.25 in W x 2.5 in H x 1.94 in L (approximately 83 x 64 x 49 mm)
- UPC: 783927459167
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.