250 lm LED path light · 12V 2700K · copper finish · Kichler 15839CO27R
What this product is for
This low-voltage landscape path light is used to illuminate walkways, planting beds, and outdoor points of interest with a warm 2700K light output. It is a 12V integrated LED fixture with a copper finish and wet-location rating for exterior installations.
Use for
Use for residential and light commercial landscape lighting where a warm, lower-glare path light is needed. Suitable for pathways, garden borders, entry approaches, and similar outdoor pedestrian areas. The fixture operates on 9-15V and is supplied with an 8 in (203 mm) in-ground stake and approximately 55 in leads for connection to a low-voltage landscape system.
Avoid for
Avoid using this fixture where line-voltage luminaires are required, where an electronic transformer is being used, or where a replaceable-lamp fixture is specifically preferred for future lamp-only maintenance. Do not use it as a flood, spot, or area light where higher output or directional beam control is required.
Best for
Best for contractors and homeowners wanting a traditional copper path light with integrated LED performance and warm white output. Copper will naturally patina over time, which can suit landscape projects where a weathered finish is acceptable or preferred.
Installed in
Typically installed along walkways, garden paths, landscape beds, and around patios in low-voltage outdoor lighting systems. With an overall height of 21.5 in (546 mm) and a 6 in (152 mm) diameter shade, it fits common path-light layouts in residential landscaping.
Why this product exists
This fixture provides a simple path-light option for low-voltage landscape systems where warm illumination, copper construction, and integrated LED operation are required. It is intended to deliver pathway lighting without the lamp changes associated with older incandescent low-voltage fixtures.
Compared with similar products
Compared with replaceable-lamp path lights, this integrated LED model reduces relamping but does not offer lamp-only replacement. Compared with larger or higher-output path lights, its 250 lm output is better suited to pathway and accent applications rather than broad area lighting. As a rule of thumb, path lights around 18-22 in (457-559 mm) high are commonly spaced to create about an 8 ft (2.4 m) pool of light, but actual performance depends on installation conditions, transformer loading, cable run length, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 15839CO27R
- Product family: Fundamentals
- Product type: LED path light
- Application: Low-voltage landscape lighting
- Input voltage: 12V nominal, 9-15V operating
- Wattage: 3W
- Light output: 250 lm
- Colour temperature: 2700K
- Light source: Integrated LED
- Finish/material: Copper
- Location rating: Wet rated
- Overall height: 21.5 in (546 mm)
- Diameter: 6 in (152 mm)
- Lead wire: approximately 55 in (1.4 m) usable #18-2 SPT1-W leads
- Mounting: Includes 8 in (203 mm) in-ground stake
- Connector: Cable connector supplied
- Installation note: Not for use with electronic transformers
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.