- Edmonton Stock: 116
120 lm Path Light · 12V · 2700K Warm White · Textured Architectural Bronze · Kichler 15821AZT27
What this product is for
This 12V low-voltage LED path light is used to illuminate walkways, garden paths, planting beds, and outdoor living areas with warm 2700K light. The textured architectural bronze finish suits residential and light commercial landscape installations.
Use for
Use for pathway definition, soft perimeter lighting, and accent lighting around shrubs, mulch beds, and hardscape edges. It is commonly selected where a lower-glare, warm-colour landscape lighting effect is preferred.
Avoid for
Avoid using this fixture where line-voltage luminaires are required, where higher-output area lighting is needed, or where a replaceable-lamp fixture is specifically preferred for future field servicing. Do not use it as a substitute for security flood lighting.
Best for
Best for coordinated 12V Kichler landscape lighting systems in residential paths, courtyard edges, and garden transitions. Typical path-light layouts aim for overlapping light patterns rather than wide spacing; as a rule of thumb, many path lights around 18 in (457 mm) high create roughly an 8 ft (2.4 m) pool of light, but actual performance depends on fixture height, spacing, lamp output, and surrounding surfaces.
Installed in
Installed in low-voltage outdoor lighting systems with a compatible landscape transformer and burial-rated cable sized for the run length and voltage drop. For longer runs, voltage drop should typically be kept to 10% or less for consistent light output across the system.
Why this product exists
This fixture provides a compact, integrated LED path-light option for installers who want warm white landscape lighting, low-voltage operation, and a finished architectural bronze appearance. It is intended to simplify path and garden lighting without using a separate replaceable lamp.
Compared with similar products
Compared with higher-lumen path lights, this model is better suited to softer pathway and garden-edge illumination rather than broad area coverage. Compared with replaceable-lamp landscape fixtures, an integrated LED design can reduce lamp replacement work, but the light source is not field-swapped like a lamped fixture. Actual maintenance and service life depend on installation conditions and operating environment.
Specifications
- Brand: Kichler
- Manufacturer part number: 15821AZT27
- Product type: LED path/spread light
- System voltage: 12V low voltage
- Light colour: 2700K warm white
- Light output: 120 lm
- Power: 2.0 W
- Finish: Textured Architectural Bronze (AZT)
- Construction: Aluminium
- Application: Outdoor landscape lighting
- Typical installation: Pathways, garden beds, landscape edges
Guidance only: layout, spacing, cable length, transformer loading, and local electrical code all affect final performance.
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceIntegrated
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 1
LED ribbon power feed clip · for 1W or 3W ribbon · clip-style power connection · Axite Lighting H8W1
H8W1
Restocking2 – Loyalty Rewards










