41 lm LED step light · 12V · louvered textured black · Kichler 15782BKT27R
What this product is for
This low-voltage 12V LED step light is designed for integration into outdoor steps, risers, walls, and hardscape features where controlled, low-level illumination is needed. The louvered face helps direct light downward and reduce glare for pedestrians.
Use for
Use for landscape steps, deck steps, retaining walls, masonry columns, and pathway transitions. It is commonly selected for warm 2700K wayfinding light in residential and light commercial exterior installations.
Avoid for
Avoid using this fixture where broad flood lighting or area lighting is required. It is not intended to replace path lights or wall packs, and it should not be specified where line-voltage fixtures are required without a compatible low-voltage transformer.
Best for
Best for compact step-lighting layouts that need a small fixture body, wet-location rating, and a more shielded light output. This style is well suited to projects where glare control matters more than raw lumen output.
Installed in
Typically installed in exterior stair risers, wood or composite deck details, landscape walls, and other outdoor architectural features. Fixture size is approximately 5 in W x 3.5 in H x 3 in D (127 x 89 x 76 mm), which helps when planning cut-in space and trim alignment.
Why this product exists
This product provides low-level safety and accent lighting in a compact form factor for 12V landscape systems. Compared with larger fixtures, it is intended to mark elevation changes and walking surfaces without overpowering the space.
Compared with similar products
Compared with open-face step lights, the louvered front offers more shielding and a softer visual effect. Compared with replaceable-lamp low-voltage fixtures, this integrated LED design reduces lamp maintenance but does not use a field-replaceable lamp. As typical guidance for low-voltage landscape systems, voltage drop is commonly kept to 10% or less and transformer sizing is often estimated at total connected wattage multiplied by 1.25. Actual performance depends on cable length, conductor size, loading, and installation conditions.
Specifications
- Brand: Kichler
- Manufacturer part number: 15782BKT27R
- Product type: LED mini step light
- Collection/family: Landscape LED
- System voltage: 12V low voltage, operating range 9-15V
- Light output: 41 delivered lumens
- Colour temperature: 2700K warm white
- CRI: 80
- Input power: 0.86W
- Light source: Integrated LED
- Finish: Textured Black
- Material: Aluminium
- Location rating: Wet rated
- Approvals: cETLus
- Dimensions: 5 in W x 3.5 in H x 3 in D (127 x 89 x 76 mm)
- Fixture weight: approximately 0.38 lb (0.17 kg)
- Rated life: up to 40,000 hours
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.