- Edmonton Stock: 1103
:
from
to
Clear
Clear
Landscape Downlight · 12V MR16 · Long Cowl, Textured Architectural Bronze · Kichler 15494AZT
SKU: 15494AZT
12V low-voltage landscape downlight with a long cowl and textured architectural bronze finish, designed for MR16 bi-pin lamps up to 50W. Commonly used for controlled downlighting on walls, planting beds, and outdoor seating areas where glare reduction matters.
What this product is for
This low-voltage landscape downlight is used to direct light downward onto planting beds, walls, small architectural features, and outdoor living areas. The long cowl helps shield the lamp and reduce glare in viewing areas.
Use for
Use for 12V landscape lighting systems where you want a compact directional fixture with a replaceable MR16 bi-pin lamp. Suitable for mounting in trees, under eaves, or on structures for accent and downlighting applications.
Avoid for
Avoid for line-voltage installations, integrated LED-only specifications, or applications requiring a lamp to be included in the box. This fixture is lamp-ready and typically requires a compatible MR16 lamp selected separately.
Best for
Best for contractors and landscape installers who want beam spread flexibility by choosing the MR16 lamp separately. It is also a practical choice where serviceability matters, since replaceable lamp systems can reduce long-term maintenance cost compared with fully integrated fixtures.
Installed in
Typically installed in residential and light commercial landscape lighting systems, including gardens, patios, courtyards, façade lighting layouts, and outdoor amenity spaces. The fixture body is approximately 3-3/4 in high x 2-1/2 in wide x 10 in deep (about 95 x 64 x 254 mm) and includes approximately 3 ft (0.9 m) of wire.
Why this product exists
This fixture provides a compact downlighting option with more shielding than an open accent light. The extended cowl helps control brightness at the source, which is useful when the fixture is mounted where occupants may see it directly.
Typical guidance: lower wattage MR16 lamps are commonly used for tighter accenting and smaller features, while lamp choice and beam angle determine actual light spread. Actual performance depends on lamp selection, mounting height, aiming, layout, and local electrical code.
Compared with similar products
Compared with open-face accent lights, this long-cowl design offers better glare control. Compared with integrated LED landscape fixtures, it gives more flexibility because the MR16 lamp can be selected or replaced separately. For buyers standardizing maintenance stock, a replaceable MR16 platform can simplify service planning.
Specifications
- Manufacturer part number: 15494AZT
- Brand: Kichler
- Product type: Landscape downlight / mini accent downlight
- System voltage: 12V low voltage
- Lamp type: 1 x MR16 bi-pin, lamp not included
- Maximum lamp wattage: 50W
- Finish: Textured Architectural Bronze
- Construction: Aluminium
- Dimensions: 3-3/4 in H x 2-1/2 in W x 10 in D (approximately 95 x 64 x 254 mm)
- Lead wire: 3 ft (0.9 m)
- UPC: 783927238779
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceMR16
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
