- Edmonton Stock: 1184
:
from
to
Clear
Clear
Landscape accent light · 12V MR11 bi-pin · textured architectural bronze · Kichler 15484AZT
SKU: 15484AZT
12V landscape accent light for targeted illumination of trees, walls and architectural features in low-voltage outdoor lighting systems. Uses one MR11 bi-pin lamp (sold separately) and is commonly selected where a compact fixture with a longer cowl helps control glare; actual light output depends on the lamp installed and site conditions.
What this product is for
This low-voltage landscape accent light is used to direct light onto trees, walls, columns, signage and other outdoor focal points. The longer cowl helps shield the lamp and reduce glare in finished landscape installations.
Use for
Use on 12V landscape lighting systems operating within a 9-15V range. Common applications include uplighting small trees, grazing textured walls, and highlighting garden features where a compact fixture is preferred.
Avoid for
Avoid where an integrated LED fixture is required, where a lamp is not desired as a separate line item, or where broad flood distribution is needed without selecting a suitable lamp. Do not use on line-voltage circuits.
Best for
Best for contractors and landscape installers who want a replaceable-lamp fixture in a textured architectural bronze finish for serviceable low-voltage systems. A replaceable lamp design can simplify future maintenance and output changes compared with fully integrated fixtures.
Installed in
Typically installed in residential and light commercial landscape projects, garden beds, around hardscape features, and near façades. Fixture size is approximately 2.5 in W x 3.67 in H x 10 in L (64 x 93 x 254 mm).
Why this product exists
This fixture provides a compact aiming solution for low-voltage accent lighting while allowing the installer to choose the lamp, beam spread and output separately. That flexibility is useful when different trees, walls or focal points need different light levels or beam angles.
Compared with similar products
Compared with integrated LED accent fixtures, this model uses a replaceable MR11 bi-pin lamp, so lumen output, beam spread and colour temperature depend on the lamp selected. As a rule of thumb, smaller landscape accent fixtures are commonly used for smaller trees and tighter focal lighting. Actual performance depends on lamp choice, aiming, spacing, voltage drop and local electrical code.
Specifications
- Product type: Landscape accent light / spot & flood style fixture
- Brand: Kichler
- Manufacturer part number: 15484AZT
- Finish: Textured Architectural Bronze
- System voltage: 12V low voltage
- Operating voltage: 9-15V
- Lamp type: MR11
- Socket type: Bi-pin (BIPI)
- Lamp count: 1
- Location rating: Wet rated
- Approximate size: 2.5 in W x 3.67 in H x 10 in L (64 x 93 x 254 mm)
- Lamp included: No, sold separately
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceMR16
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
