Wall Wash Fixture · 12V Low Voltage · Adjustable Six Groove Bronze Finish · Kichler 15361AZT
What this product is for
This low-voltage landscape wall wash fixture is used to spread light evenly across walls, planting beds, shrubs, and textured exterior surfaces. The adjustable head helps direct a wider beam where a narrow accent light would create hot spots.
Use for
Use for landscape lighting systems operating at 12V, including feature walls, garden edges, low architectural surfaces, and broad accent lighting around residential and light commercial properties. It is suitable where a wall wash effect is preferred over a tight spot beam.
Avoid for
Avoid using this fixture where an integrated LED fixture is specifically required, where a very narrow beam is needed for long-distance spotlighting, or where line-voltage 120V fixtures are specified.
Best for
Best for contractors and installers building serviceable 12V landscape systems with replaceable lamp fixtures. As a rule of thumb, wall wash fixtures are commonly chosen when you want broader, softer coverage on a surface rather than a concentrated highlight. Actual performance depends on lamp selection, aiming angle, mounting position, and local installation conditions.
Installed in
Typically installed in landscaped beds, along foundations, near retaining walls, and around patios or walkways. The fixture is approximately 12 in H x 6 in dia. (305 mm H x 152 mm dia.) and includes an 8 in (203 mm) ground stake and approximately 46 in (1.17 m) lead wire based on distributor listing data.
Why this product exists
This fixture exists to create a low, even spread of light across a wider area than a standard accent spot. It helps reduce harsh beam edges when illuminating textured walls, shrubs, or architectural details in low-voltage outdoor lighting systems.
Compared with similar products
Compared with a standard spot light, this wall wash fixture provides a broader beam pattern for more even surface illumination. Compared with integrated LED landscape fixtures, this replaceable-lamp style can simplify future lamp changes and maintenance, depending on the installation and lamp availability.
Specifications
- Brand: Kichler
- Manufacturer part number: 15361AZT
- Product family: Six Groove
- Product type: Adjustable wall wash / accent light
- System voltage: 12V low voltage, operating range 9-15V
- Finish: Textured Architectural Bronze
- Lamp type: S8
- Base / socket: Wedge base
- Lamp included: Yes
- Total wattage: 24.4W
- Dimensions: 12 in H x 6 in dia. (305 mm H x 152 mm dia.)
- Material: Aluminium
- Diffuser: Clear polycarbonate
- Wire length: approximately 46 in (1.17 m)
- Mounting accessory: 8 in (203 mm) ground stake included
- Environment: Wet location / outdoor use; distributor listing indicates suitability for harsh or coastal environments
- Volts12Vac
- FinishTextured Architectural Bronze
- Light SourceS8
- BrandKichler Landscape Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.