- Edmonton Stock: 20
Path Light · 12V · Centre-Mount Six Groove Shade, Textured Black · Kichler 15326BKT
What this product is for
This 12V low-voltage path light is used for illuminating walkways, garden paths, planting beds, patios, and other outdoor pedestrian areas. The centre-mount design and 6 in shade are intended to spread light outward for softer pathway illumination rather than a tight accent beam.
Use for
Use for residential and light commercial landscape lighting systems where a replaceable-lamp fixture is preferred. Common applications include path runs, entry approaches, courtyard edges, and landscaped borders connected to a 12V landscape transformer.
Typical guidance: path lights around 18 to 24 in high are commonly used to create a broad pool of light along walking surfaces. Actual light spread depends on lamp type, wattage, spacing, mounting height, and surrounding landscaping.
Avoid for
Avoid using this fixture where a directional spotlight, wall wash, or integrated LED fixture is specifically required. It is also not the right choice for line-voltage 120V installations without a compatible low-voltage landscape lighting system.
Best for
Best for contractors and property owners who want a serviceable 12V path light with a replaceable S8 wedge-base lamp, a contemporary grooved shade, and a textured black finish that blends into most landscape layouts.
Installed in
Typically installed in softscape beds, along walkways, beside drive edges, around patios, and in garden borders. The fixture is commonly paired with low-voltage landscape cable and a properly sized outdoor transformer.
Rule of thumb: keep voltage drop to approximately 10% or less on low-voltage landscape runs. Wire size is commonly selected by run length and connected load. Actual performance depends on installation conditions, layout, lamp load, and local electrical code.
Why this product exists
This fixture provides a traditional serviceable alternative to integrated LED path lights. A replaceable-lamp design can simplify maintenance and future lamp changes without replacing the full fixture, which can help reduce long-term service costs in many landscape lighting systems.
Compared with similar products
Compared with smaller accent fixtures, this path light is built to provide broader pedestrian-area illumination. Compared with integrated LED path lights, it uses a replaceable lamp and gives installers more flexibility when selecting lamp type and output, within the fixture's rating.
Specifications
- Manufacturer part number: 15326BKT
- Brand: Kichler
- Product type: Landscape path and spread light
- Mounting style: Centre mount
- System voltage: 12V low voltage
- Lamp type: S8 wedge base
- Maximum lamp wattage: 24.4W
- Number of lamps: 1
- Material: Aluminium
- Finish: Textured Black
- Shade diameter: 6 in (152 mm)
- Fixture height: 22.75 in (578 mm)
- Lead wire: 35 in (889 mm)
- Application: Pathways, gardens, landscape borders
- Certifications listed by distributors: UL Canada and US, ETL, CSA
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Path Light · MR11 Lamp-Ready · Black Finish · Vista Professional Lighting ML4011-B-NL
ML4011-B-NL
Available to Order | Typically Arrives in 1 - 4 Weeks Ships From California USA362 – Loyalty Rewards- Edmonton Stock: 31
- Edmonton Stock: 9
- Edmonton Stock: 13
- Edmonton Stock: 4
















