Dual-Element Infrared Patio Heater · 3000W 208V · 33 in Stainless Steel Beige · Infratech WD-3028-SS-BE
What this product is for
This electric infrared patio heater is designed to deliver concentrated radiant heat to people and surfaces rather than heating the surrounding air. It is suited to residential and light commercial spaces where wind and open-air conditions can reduce the effectiveness of forced-air or convective heating.
Use for
Use for covered patios, restaurant seating areas, terraces, outdoor lounges, garages, workshops, and indoor areas needing targeted spot heat. The WD-Series dual-element format is commonly selected where higher mounting heights and stronger heat concentration are needed.
Avoid for
Avoid using this heater where a low-voltage control package or plug-in installation is expected, or where broad whole-room heating is required. It is not the right choice when the installation area cannot support the required 208V branch circuit, mounting clearances, and control arrangement.
Best for
Best for electricians, contractors, and property owners specifying a hardwired infrared heater with a beige finish over 304 stainless steel construction, dual elements, and multiple mounting options. It fits projects where appearance, corrosion resistance, and directional heat matter.
Installed in
Typically installed on walls, ceilings, poles, or in an optional flush-mount frame. The heater body is approximately 33 in wide x 8 3/16 in high x 9 3/8 in deep (838 x 208 x 238 mm), which helps when planning spacing and mounting layout.
Why this product exists
This model exists for projects that need more concentrated radiant output than a single-element heater while keeping a relatively compact 33 in (838 mm) form factor. At 3000W on 208V, it draws about 14.4A, so it is commonly paired with a dedicated appropriately sized 208V circuit and compatible controls.
As a rule of thumb, infrared patio heater coverage is installation-dependent rather than exact. Actual comfort area depends on mounting height, wind exposure, ambient temperature, surrounding surfaces, and control settings.
Compared with similar products
Compared with single-element patio heaters, this dual-element WD-Series model is intended for larger-scale or higher-mounting applications with more concentrated heat. Compared with gas patio heaters, electric infrared models avoid on-site combustion and direct heat where people are sitting or standing. Compared with 240V versions of the same wattage, this 208V model is intended for 208V electrical systems and should be matched to the correct supply voltage.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-3028-SS-BE
- Series: WD-Series
- Product type: Dual-element electric infrared patio heater
- Wattage: 3000W
- Voltage: 208V
- Current: approximately 14.4A
- Construction: 304 stainless steel
- Finish: Beige
- Mounting: Wall, ceiling, pole, or optional flush mount
- Approximate dimensions: 33 in W x 8 3/16 in H x 9 3/8 in D (838 x 208 x 238 mm)
- Application: Indoor or outdoor radiant comfort heating
- Control compatibility: Commonly installed with Infratech custom controls or duplex switches for variable or half/full-power operation
Estimated application guidance only: comfort coverage varies by mounting height and site conditions. Actual performance depends on installation conditions, exposure, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.