Dual Element Infrared Heater · 3000W 240V 33 in · Beige Stainless Steel Housing · Infratech WD-3024-SS-BE
What this product is for
The Infratech WD-3024-SS-BE is a 3000W, 240V dual-element infrared heater designed for fixed comfort heating in residential and light commercial spaces. It is part of the WD-Series, which is intended for more concentrated heat output and larger coverage areas than lower-output single-element models.
Use for
Use for covered patios, outdoor dining areas, pergolas, garages, workshops, entrance canopies, and indoor commercial or residential spaces where directional radiant heat is preferred. This model is commonly selected where a 33 in (838 mm) heater length fits the available wall or ceiling space and 240V power is available.
Avoid for
Avoid using this heater as a whole-room primary heating system for enclosed spaces unless the heat load has been properly calculated. It is also not the right choice where a different voltage, a longer heater body, or marine-grade construction is required for severe salt-air environments.
Best for
Best for electricians, contractors, and property owners needing a slim-profile infrared heater with dual elements, beige housing, and concentrated radiant output for seating or activity zones. It suits projects where appearance matters and where wall, ceiling, pole, or optional flush-mount installation may be considered.
Installed in
Typically installed in covered outdoor living areas, restaurant patios, hospitality spaces, garages, and sheltered commercial applications. Manufacturer literature indicates WD-Series dual-element fixtures can be mounted up to 12 ft (3.7 m), with actual comfort results depending on wind, ambient temperature, mounting height, and placement.
Why this product exists
This heater exists for applications that need stronger, more concentrated radiant heat than compact single-element units can provide, while keeping a relatively short 33 in (838 mm) body. Infrared heating warms people and surfaces directly rather than trying to heat all surrounding air, which is useful in semi-exposed spaces.
Typical guidance only: for outdoor comfort heating, layout and mounting position matter more than wattage alone. Actual performance depends on installation conditions, exposure, insulation, layout, and local electrical code.
Compared with similar products
Compared with lower-wattage or single-element infrared heaters, this 3000W dual-element model is better suited to larger or more exposed seating zones. Compared with longer WD-Series models, it fits tighter wall sections while still delivering concentrated radiant output. Beige is a factory body colour option added to the WD-3024 stainless steel base model designation.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-3024-SS-BE
- Series: WD-Series
- Product type: Dual-element electric infrared heater
- Wattage: 3000W
- Voltage: 240V
- Current: 12.5A
- Heater length: 33 in (838 mm)
- Finish/colour: Beige body with stainless steel base model designation
- Application: Indoor/outdoor comfort heating
- Mounting: Wall, ceiling, pole mount, or optional flush mount frame where applicable
- Suggested mounting height: up to 12 ft (3.7 m), per manufacturer reference for WD-Series dual-element fixtures
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.