Single Element Infrared Patio Heater · 3000W 240V · Biscuit Finish · Infratech W-3024-BI
What this product is for
This electric infrared radiant heater is used to warm patios, decks, pergolas, restaurant seating areas, and other covered outdoor or indoor spaces where targeted comfort heat is needed without moving air.
Use for
Use for residential patios, covered balconies, outdoor dining areas, and light commercial hospitality spaces. This 3000W, 240V single-element model is commonly selected where a longer heater body and focused radiant output suit the mounting layout.
Avoid for
Avoid using this heater as whole-room space heating for enclosed interiors, or in layouts where mounting height, clearances, ventilation, or control requirements cannot be met. Do not assume one heater will fully cover open or windy areas.
Best for
Best for electricians and contractors specifying a hardwired radiant heater for covered outdoor comfort heat, especially where a biscuit-coloured housing is preferred to match the surrounding finish. It is also a practical choice for flush-mount applications where the W-Series body depth is suitable for recessed installations.
Installed in
Typically installed in covered patios, soffits, pergolas, restaurant canopies, and similar structures. Source listings indicate typical mounting heights of about 7 to 11 ft (2.1 to 3.4 m), depending on the application and installation method.
Why this product exists
This heater provides directional infrared heat where gas piping is not desired and where quiet, electric comfort heat is preferred. As a rule of thumb, infrared patio heaters are chosen to warm occupants and surfaces directly rather than the surrounding air, which is useful in semi-exposed spaces. Actual performance depends on mounting height, wind exposure, enclosure, and local electrical code.
Compared with similar products
Compared with slimmer surface-mount-focused models, the Infratech W-Series is commonly used where flush mounting is required. Compared with dual-element models, this single-element 3000W heater is a simpler option for smaller zones or single-heater layouts, but larger or more exposed areas may require multiple heaters.
Specifications
- Brand: Infratech
- Manufacturer part number: W-3024-BI
- Type: Single-element electric infrared radiant patio heater
- Wattage: 3000W
- Voltage: 240V
- Current: 12.5A
- Length: 61.25 in (approximately 1556 mm)
- Approximate dimensions from distributor listing: 61.25 x 8 x 3 in (about 1556 x 203 x 76 mm)
- Finish: Biscuit
- Construction: 304 stainless steel body with powder-coated finish
- Mounting: Surface mount or flush mount
- Typical mounting height: 7 to 11 ft (2.1 to 3.4 m)
- Use location: Indoor or outdoor covered applications, subject to manufacturer installation requirements
- Listing: UL listed
- Warranty: 3-year manufacturer warranty
- Trade note: At 12.5A running load, this heater is typically applied on a dedicated 240V branch circuit sized to suit code, controls, and continuous-load requirements. Verify conductor, overcurrent protection, disconnecting means, and control compatibility before ordering.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.