Single On/Off Switch · Flush Mount · Weatherproof Cover · Infratech 14-4410
What this product is for
The Infratech 14-4410 is a single on/off wall control for compatible single-element Infratech electric infrared heaters. It is a flush-mount assembly with a weatherproof cover for outdoor or exposed-area installations where a simple manual switch is required.
Use for
Use this control with compatible Infratech single-element heater series such as C-Series, SL-Series and W-Series, where a basic on/off function is preferred over timer or input regulator controls. It suits patios, restaurant seating areas, covered outdoor spaces and similar installations requiring a clean in-wall appearance.
Avoid for
Avoid using this switch where dimming, zoning or variable heat control is required. It is also not the correct choice for dual-element heater control, or where connected load exceeds the switch rating.
Best for
Best for straightforward heater switching in exposed outdoor locations where electricians need a flush installation with weather protection. It is commonly selected when the goal is simple user control, minimal wall projection and compatibility with single-element Infratech heaters.
Installed in
Typically installed in exterior walls, covered patios, outdoor hospitality spaces and residential or light commercial radiant heating projects. The assembly includes a gang box and weatherproof cover for flush mounting.
Why this product exists
This control provides a low-complexity switching option for heater installations that do not need advanced control packages. For buying decisions, a practical rule of thumb is to keep the connected heater load within the switch's 20 A maximum rating and verify voltage and heater compatibility before ordering. Actual installation requirements depend on heater model, circuit design and local electrical code.
Compared with similar products
Compared with surface-mount control options, this flush-mount version gives a cleaner finished appearance. Compared with duplex or dual controls, this model is intended for single-element heater applications only. Compared with timers or input regulators, it offers simple on/off operation without variable output control.
Specifications
- Manufacturer: Infratech
- Part number: 14-4410
- Product type: Single on/off switch control
- Mounting: Flush mount
- Cover: Weatherproof cover included
- Application: Exposed outdoor areas
- Compatibility: Single-element Infratech heaters; commonly listed for C-Series, SL-Series and W-Series
- Electrical rating: 120 to 277 VAC
- Maximum switch load: 20 A
- Approximate overall size: 5.5 in x 3.63 in x 2.25 in (140 x 92 x 57 mm)
- Gang box size: 4 in H x 2.12 in W x 1.87 in D (102 x 54 x 48 mm), approximately
- Faceplate material: Stainless steel cover plate
- Construction: Steel gang box, stainless cover, plastic switch body
- Country of manufacture: USA
- Warranty: 3-year manufacturer warranty
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.