On/Off Switch Assembly · Single Flush Mount · Stainless Steel Wall Plate with Gang Box · Infratech 14-4400
What this product is for
This is a single on/off switch assembly for compatible Infratech radiant heater installations. It provides straightforward manual control and includes a stainless steel wall plate with gang box for a flush-mount finished appearance.
Use for
Use for Infratech single-element heater control where a basic on/off wall switch is required. Suitable for residential patios, covered outdoor living areas, hospitality spaces, and light commercial heating zones where simple switching is preferred over variable control.
Avoid for
Avoid using this assembly where variable heat adjustment, timer functions, smart controls, or multi-heater load management are required. Also avoid assuming universal compatibility with non-Infratech systems without confirming electrical ratings and control requirements.
Best for
Best for clean flush-mount installations that need a corrosion-resistant stainless steel finish and a simple user interface. This is a practical choice for projects where the heater is either fully on or fully off, with no intermediate output setting needed.
Installed in
Typically installed in finished wall locations near the heater control point, using the included gang box. Common installations include outdoor kitchens, patios, restaurant seating areas, vestibules, and other radiant-heated spaces. Final placement should follow local electrical code and the heater manufacturer's installation instructions.
Why this product exists
This control assembly exists for projects that need a simple, reliable switching method without stepping up to more advanced control packages. For many single-heater zones, an on/off switch is the most direct and economical control method.
Typical guidance: simple on/off control is commonly used where occupants only need full-output heat when the area is occupied. Actual control suitability depends on heater model, connected load, switching arrangement, and local code.
Compared with similar products
Compared with duplex or stack switch assemblies, this single-switch version is intended for simpler single-zone control. Compared with input regulators or custom control systems, it offers less adjustment but faster operation and a more straightforward installation approach.
Specifications
- Manufacturer: Infratech
- Manufacturer part number: 14-4400
- Product type: Simple on/off switch assembly
- Mounting style: Flush mount
- Configuration: Single switch
- Wall plate material: Stainless steel
- Included: Wall plate and gang box
- Typical application: Control for compatible Infratech single-element heaters
- Current rating: 20 A (source listing reference)
- Installation note: Confirm box location, conductor fill, and connected heater load before installation
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.