Voltage/Continuity Tester · 5-600V AC/DC · Solenoid with vibration indication · IDEAL Industries 61-076
What this product is for
The IDEAL Industries 61-076 VOL-CON® is a direct-contact voltage and continuity tester for electricians and maintenance technicians who need to verify AC/DC voltage presence and basic continuity on branch circuits, controls, panels, and equipment.
Use for
Use it to check 5-600V AC/DC, confirm polarity on DC circuits, and test continuity on de-energized conductors or components. The low-impedance solenoid design can help reduce misleading ghost voltage readings compared with high-impedance electronic testers.
Avoid for
Avoid using it where a true numerical meter reading, resistance measurement, or advanced troubleshooting functions are required. It is not a replacement for a multimeter when you need exact voltage values, current, or detailed diagnostics.
Best for
Best for service work, panel checks, motor and control verification, and quick go/no-go testing where rugged construction and fast indication matter. It suits electricians who prefer a contact tester with both visual and vibration indication.
Installed in
Commonly used in residential, commercial, and light industrial electrical work, including switchboards, distribution panels, disconnects, receptacle circuits, lighting circuits, and control cabinets.
Why this product exists
This tester is built for quick field verification without switching between voltage and continuity modes. Independent solenoid and electronic circuitry provide backup voltage indication for added safety, while replaceable test leads and shielded probe tips support everyday jobsite use.
Compared with similar products
Compared with non-contact testers, this model requires direct contact but gives a more deliberate indication of actual circuit presence. Compared with a digital multimeter, it is faster for basic checks but does not provide precision measurement. As a typical trade rule of thumb, direct-contact low-impedance testers are commonly chosen when electricians want to reduce nuisance readings from induced voltage. Actual results depend on circuit conditions and installation layout.
Specifications
- Product family: VOL-CON® voltage/continuity tester
- Manufacturer part number: 61-076
- Voltage range: 5-600V AC/DC
- Functions: voltage indication, continuity test, DC polarity indication
- Indication: LED/neon scale with vibration mode
- Design: low impedance solenoid tester
- Safety/construction features: independent solenoid and electronic circuitry, shielded probe tips, ultrasonically welded and O-ring sealed housing
- Leads: replaceable test leads
- Typical application: direct-contact troubleshooting on energized and de-energized circuits
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.