Multi-Crimp/Strip Tool · 10-22 AWG · Cuts, Crimps and Strips · IDEAL 45-778
What this product is for
The IDEAL 45-778 Multi-Crimp/Strip Tool is a hand tool for cutting wire, stripping 10-22 AWG conductors, and crimping insulated and non-insulated connectors. It is suited to service work, maintenance, panel work, and general electrical terminations where carrying one multi-function tool is practical.
Use for
Use for stripping and terminating 10-22 AWG copper conductors, cutting wire, and making basic crimp connections on insulated and non-insulated terminals. It is commonly used by electricians, maintenance technicians, and contractors for field repairs and light assembly work.
Avoid for
Avoid using this tool where a ratcheting or application-specific crimper is required for controlled, repeatable production crimps, or where the connector manufacturer specifies a dedicated die set. It is also not intended as a precision tool for data connectors or specialty terminations.
Best for
Best for electricians who want one tool that handles common strip-and-crimp tasks in the pouch. The high-leverage pivot is useful where reduced hand force is preferred during repeated cuts and crimps.
Installed in
Used in residential, commercial, and industrial electrical work. Common applications include control wiring, fixture leads, device terminations, and maintenance repairs.
Why this product exists
This tool combines three common functions—cutting, stripping, and crimping—so electricians can reduce tool changes during routine termination work. As a rule of thumb, combination tools are typically chosen for service efficiency, while dedicated crimpers are commonly used when crimp consistency is the top priority. Actual results depend on conductor type, connector selection, and installation practice.
Compared with similar products
Compared with a dedicated wire stripper, this tool adds crimping and bolt-cutting capability in one body. Compared with a dedicated ratcheting crimper, it is faster to carry and use for mixed tasks, but typically offers less application-specific crimp control for repetitive terminations.
Specifications
- Manufacturer part number: 45-778
- Brand: IDEAL
- Product type: Multi crimp/strip tool
- Wire size range: 10-22 AWG
- Functions: cuts wire, strips wire, crimps insulated and non-insulated connectors, cuts bolts
- Construction: forged steel
- Operation feature: high-leverage pivot for reduced hand force
- Colour: black/yellow
- Warranty: limited lifetime
- Country of manufacture: Made in the U.S.A.
Where conductor size is the main buying factor, 10-22 AWG covers many common branch, control, and low-current termination tasks. Always match the connector and crimp method to the wire size and terminal manufacturer requirements.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.