Multi-Purpose Hole Saw · 4-3/8 in (111 mm) · Tri-Bore carbide-tipped design · Ideal Industries 36-360
What this product is for
The Ideal Industries 36-360 Tri-Bore multi-purpose hole saw is a 4-3/8 in (111 mm) carbide-tipped cutter for electricians and contractors making larger openings in wood with nails, cement board, composite enclosures and ceiling tile.
Use for
Use for recessed lighting cut-ins and similar round openings where a 4-3/8 in (111 mm) hole is required. Manufacturer literature lists this size for Capri, Halo, Marco and Mini Juno applications.
Avoid for
Avoid using this as a general-purpose metal hole saw for thick steel or stainless applications. It is intended for multi-material electrical trade work in abrasive materials and wood-based assemblies, with the correct arbour and pilot.
Best for
Best for electricians who need one hole saw for mixed site conditions, especially when cutting through wood that may contain nails or when working with cement board and composite electrical enclosures.
Installed in
Typically used on site in residential and light commercial electrical work, including ceilings, wall assemblies, panel modifications and retrofit lighting openings where the specified hole size matches the device or trim.
Why this product exists
This Tri-Bore design is built to cut faster than self-feed bits in wood and faster than carbide grit tools in abrasive materials, while giving electricians a single cutter for several common materials. For practical buying guidance, a dedicated recessed-lighting hole saw size can reduce rework when the trim or housing calls for an exact opening. Actual fit depends on the fixture manufacturer and model.
Compared with similar products
Compared with a bi-metal hole saw, this carbide-tipped Tri-Bore style is better suited to abrasive materials and wood with embedded nails. Compared with a self-feed bit, it is intended for larger finished openings rather than rough boring. Pilot bit and arbour are not included and must match the Tri-Bore system.
Specifications
- Brand: Ideal Industries
- Manufacturer part number: 36-360
- Product family: Tri-Bore
- Product type: Multi-purpose hole saw
- Hole diameter: 4-3/8 in (111 mm)
- Cutting edge: Carbide tips / carbide-tipped design
- Applications: Wood with nails, cement board, composite enclosures, ceiling tile
- Listed application reference: Capri, Halo, Marco, Mini Juno
- Required arbour: Ideal Tri-Bore 35-394 for this size
- Pilot options sold separately: 36-367 spade bit for wood, 36-368 carbide pilot for abrasive materials
- UPC: 783250714193
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.