Multi-Purpose Hole Saw · 4-1/4 in (108 mm) · Carbide-Tipped Tri-Bore · IDEAL 36-358
What this product is for
The IDEAL 36-358 is a Tri-Bore multi-purpose hole saw with a 4-1/4 in (108 mm) cutting diameter and carbide-tipped cutting edge. It is used by electricians, contractors and maintenance teams for larger round cut-outs in wood with nails, cement board, composite enclosures, ceiling tile and similar jobsite materials.
Use for
Use for cutting 4-1/4 in (108 mm) openings in mixed materials where a standard bi-metal hole saw may wear quickly. Typical uses include openings associated with 3 in pipe with couplings and 4 in dryer vent work, as well as larger panel or enclosure modifications where the material matches the manufacturer application guidance.
Avoid for
Avoid using this hole saw as a general-purpose solution for heavy structural steel, thick stainless steel or materials outside the listed application range. Always match the arbor and drill capacity to the saw size and material being cut.
Best for
Best for trade users who need one hole saw for varied site materials and want the longer life of a carbide-tipped edge. This size is a practical choice when a larger finished opening is required and cleaner cutting helps reduce follow-up trimming.
Installed in
Commonly used on renovation and service work in residential, commercial and light industrial settings, including wall assemblies, ceiling tile, composite panels and enclosure surfaces. For hole saws of this diameter, a rule of thumb is to use a steady feed rate and suitable drill torque to maintain control and reduce chatter. Actual performance depends on material, backing, speed and operator technique.
Why this product exists
This product exists to give contractors a larger-diameter hole saw that can handle abrasive or mixed materials better than many standard tooth-pattern saws. The Tri-Bore carbide-tipped design is intended for multi-material cutting where productivity and edge life matter.
Compared with similar products
Compared with a standard bi-metal hole saw, this carbide-tipped model is better suited to tougher mixed materials such as wood with embedded nails, cement board and composites. Compared with a single-material cutter, it offers broader application flexibility on service and retrofit work.
Specifications
- Manufacturer part number: 36-358
- Brand: IDEAL
- Product family: Tri-Bore
- Product type: Multi-purpose hole saw
- Cutting diameter: 4-1/4 in (108 mm)
- Cutting edge: Carbide-tipped
- Typical materials: Wood with nails, cement board, composite enclosures, ceiling tile and similar materials
- Typical application guidance: 3 in pipe with couplings, 4 in dryer vent
- Compatible arbors: IDEAL 35-393 and 35-394
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.