Hole Saw · 2-1/8 in (54 mm) · TRI-Bore Multi-Purpose Carbide Cutting Edge · IDEAL 36-351
What this product is for
The IDEAL 36-351 TRI-Bore multi-purpose hole saw is used to cut a 2-1/8 in (54 mm) opening in mixed jobsite materials. It is part of IDEAL's TRI-Bore hole saw range and uses a carbide cutting edge for trade use where standard bi-metal saws may wear quickly in abrasive or nail-embedded material.
Use for
Use for wood with nails, cement board, composite enclosures, ceiling tile and other multi-material cutting tasks listed by IDEAL. This 2-1/8 in size is commonly selected for approximately 1-1/2 in pipe and lock installations where a larger finished opening is required.
Avoid for
Avoid choosing this saw based only on nominal trade size. Confirm the required finished hole size, arbor compatibility and material thickness before ordering. For heavy structural steel or applications outside the manufacturer's intended material range, use a cutter designed specifically for that material.
Best for
Best for electricians, maintenance teams and contractors who need one hole saw for varied materials on service work, retrofit work and enclosure modifications. It is a practical choice when cutting conditions are mixed and edge life matters more than a general-purpose wood-only saw.
Installed in
Typically used on electrical panels, composite or non-metallic enclosures, wall and ceiling assemblies, and general site fabrication work. For best results, pair it with the compatible TRI-Bore arbor and run at a controlled speed with steady feed pressure.
Why this product exists
This model gives contractors a carbide-edge option in a common trade size so they can cut through abrasive and mixed materials with fewer saw changes. Compared with a standard hole saw, a multi-purpose carbide design is typically chosen when the material may include fasteners, cementitious board or layered assemblies.
Compared with similar products
Compared with a bi-metal hole saw, this TRI-Bore model is intended for broader material compatibility and longer life in abrasive applications. Compared with a single-material cutter, it is better suited to service vans and mixed-material jobs. As a rule of thumb, carbide multi-purpose saws are commonly chosen when the exact site material can vary; actual performance depends on material composition, thickness, drill speed and cooling.
Specifications
- Manufacturer: IDEAL Industries
- Part number: 36-351
- Product family: TRI-Bore
- Product type: Multi-purpose hole saw
- Cutting diameter: 2-1/8 in (54 mm)
- Cutting edge: Carbide
- Typical application note: approximately 1-1/2 in pipe and lock installation
- Compatible arbors: IDEAL TRI-Bore arbors 35-393 and 35-394
- Common materials listed by manufacturer literature: wood with nails, cement board, composite enclosures, ceiling tile and more
Buying note: hole saw selection should also consider arbor size, pilot bit condition, drill torque and the finished opening required by the fitting or hardware.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.