Hole Cutter · 2 in Cutting Diameter · Carbide-Tipped TKO for Sheet Metal · IDEAL 36-309
What this product is for
The IDEAL 36-309 TKO hole cutter is used to cut a 2 in (51 mm) hole in sheet metal and stainless steel. It is intended for electrical enclosure work where electricians need a cleaner finished hole with less burr than a typical hole saw.
Use for
Use for panels, junction boxes, cabinets, control enclosures, and other thin-gauge metal surfaces. It is suitable for handheld drills and drill presses where a 2 in trade-size opening is required.
Avoid for
Avoid using this cutter for deep hole cutting in thick structural material, masonry, or wood framing applications where a conventional hole saw or annular cutter would be more appropriate. Carbide teeth should also be protected from impact damage during storage and handling.
Best for
Best for electricians and panel builders who want fast starts, reduced walking, and a smoother hole edge in metal enclosures. It is a practical choice when hole quality matters and cleanup time needs to be reduced.
Installed in
Typically used on electrical panels, junction boxes, disconnects, cabinets, and fabricated sheet metal assemblies in residential, commercial, and industrial work.
Why this product exists
TKO hole cutters are designed as a faster, cleaner alternative to standard knockout methods or general-purpose hole saws for thin metal. The carbide-tipped cutting edge helps improve life in sheet metal and stainless steel applications, while the pilot drill helps keep the cut centred.
Compared with similar products
Compared with a standard bi-metal hole saw, this style of hole cutter is commonly chosen for cleaner holes in metal, less burr formation, and lower cutting effort in enclosure work. As typical trade guidance, using cutting oil can help extend cutter life and improve cut quality. Actual performance depends on material thickness, drill speed, feed pressure, lubrication, and installation conditions.
Specifications
- Manufacturer: IDEAL Industries
- Manufacturer part number: 36-309
- Product family: TKO
- Product type: Carbide-tipped hole cutter
- Cutting diameter: 2 in (51 mm)
- Cutting depth: 1/4 in (6 mm)
- Pilot drill size: 3/8 in (9.5 mm)
- Cutting edge: Carbide tip
- Applicable materials: Sheet metal and stainless steel
- Typical use: Clean, burr-reduced holes in electrical enclosures and metal boxes
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.