Hole Cutter · 1-7/16 in (37 mm) Carbide-Tipped · SmoothStart Pilot for Sheet Metal · IDEAL 36-306
What this product is for
The IDEAL 36-306 TKO hole cutter is used to cut a 1-7/16 in (37 mm) hole in sheet metal, including stainless steel and other ferrous or non-ferrous metal enclosures. It is designed for electricians and contractors who need a cleaner alternative to standard hole saws or a faster option than manual knockout setups for light sheet-metal work.
Use for
- Electrical panels and cabinets
- Junction boxes and pull boxes
- Sheet metal enclosures
- Stainless steel and general sheet-metal drilling
- Handheld drills with a 3/8 in chuck or larger
Avoid for
- Material thicker than 1/8 in (3.2 mm)
- Deep cutting applications beyond sheet metal
- Masonry, wood boring, or general-purpose rough cutting
- Applications where a different finished hole size is required for fittings or conduit trade sizes
Best for
Best for electricians cutting repeat holes in metal boxes and enclosures where clean edges, reduced burrs, and controlled cutting depth are important. The built-in pilot and over-drill flange help guide the cutter and limit penetration beyond the sheet metal.
Installed in
Typically used on electrical service work, commercial tenant fit-outs, control panels, retrofit enclosure work, and shop fabrication of metal electrical boxes and cabinets.
Why this product exists
This cutter is made for faster, cleaner hole cutting in sheet metal than many conventional hole saws, while avoiding the setup time of knockout punches in lighter-gauge applications. IDEAL's SmoothStart pilot drill is intended to reduce walking and help protect the carbide cutter during startup.
Compared with similar products
Compared with a bi-metal hole saw, this carbide-tipped cutter is intended for sheet metal and stainless steel cutting with cleaner, more controlled results. Compared with a knockout set, it can be a practical choice when speed and portability matter. As typical trade guidance, use cutting oil to help extend cutter life and improve chip evacuation. Actual performance depends on material type, drill speed, pressure, lubrication, and installation conditions.
Specifications
- Product type: Hole cutter
- Brand series: TKO
- Manufacturer: IDEAL Industries
- Manufacturer part number: 36-306
- Cutting diameter: 1-7/16 in (37 mm)
- Cutting material: Sheet metal, including stainless steel, ferrous metal, and non-ferrous metal
- Tooth material: Carbide-tipped
- Pilot drill: SmoothStart pilot included
- Arbor: Supplied with arbor
- Shank size: 3/8 in
- Maximum material thickness: 1/8 in (3.2 mm)
- Application note: Built-in over-drill flange helps prevent penetration beyond sheet metal
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.