Hole Cutter · 1-1/8 in (29 mm) · Carbide-Tipped TKO for Sheet Metal · IDEAL 36-303
What this product is for
The IDEAL 36-303 TKO hole cutter is used to cut clean 1-1/8 in (29 mm) holes in sheet metal and stainless steel for electrical enclosures, panels, boxes and similar metal fabrication work. It is sized for applications commonly associated with 3/4 in (19 mm) conduit trade size.
Use for
- Electrical panels and cabinets
- Junction boxes and pull boxes
- Sheet steel and stainless steel up to 1/8 in (3.2 mm) thick
- Hand drills with a 3/8 in shank capacity or larger chuck
Avoid for
- Material thicker than 1/8 in (3.2 mm)
- Masonry, wood boring or general-purpose rough cutting
- Applications where a chassis punch or knockout set is required by job preference
Best for
Best for electricians and panel builders who need a faster alternative to knockouts or bi-metal hole saws when working in thin metal. The SmoothStart pilot helps guide the cutter into the work, while the over-drill flange helps prevent cutting beyond the sheet metal.
Installed in
Typically used on-site or in the shop for service equipment, control panels, metal enclosures, cabinets and fabricated sheet metal assemblies.
Why this product exists
This cutter is designed to produce smoother, more accurate holes in thin metal with less setup than a knockout punch. For trade use, that can mean faster repetitive cuts in enclosures and less cleanup around the opening. As typical guidance, using cutting oil can help extend cutter life. Actual life depends on material, drill speed, feed pressure and installation conditions.
Compared with similar products
Compared with a standard bi-metal hole saw, a carbide-tipped hole cutter is commonly chosen for cleaner cuts in sheet metal and stainless steel. Compared with a knockout set, it can be a practical choice when speed and portability matter. This model includes an integral arbor and ejection spring, so it is ready for repetitive electrical trade work without a separate arbor setup.
Specifications
- Product type: Carbide-tipped hole cutter
- Series: TKO
- Manufacturer part number: 36-303
- Brand: IDEAL
- Cutting diameter: 1-1/8 in (29 mm)
- Associated conduit trade size: 3/4 in (19 mm)
- Cut material: Sheet metal and stainless steel
- Maximum material thickness: 1/8 in (3.2 mm)
- Shank size: 3/8 in (9.5 mm)
- Pilot: SmoothStart pilot drill included
- Arbor: Integral arbor
- Additional feature: Over-drill flange to help prevent penetration beyond sheet metal
- Additional feature: Ejection spring for slug removal
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.