Electrician Tool Kit · 16-Piece Set · Leather Tool Pouch Included · IDEAL Industries 35-800
What this product is for
The IDEAL Industries 35-800 is a 16-piece electrician tool kit supplied with a leather tool pouch for day-to-day electrical installation, service and maintenance work. It combines core hand tools, a wire stripper, screwdrivers, tester, tape measure, knife, hammer and conduit deburring tool in one carry-ready set.
Use for
Use this kit for common electrical tasks such as wire cutting and stripping, device and panel terminations, conduit deburring, layout and measuring, continuity and voltage checks, and general service calls. It is commonly used by apprentices, maintenance staff and electricians who need a compact field kit rather than buying each tool separately.
Avoid for
Avoid using this kit where insulated live-line tools, torque-specific tools, meter-grade diagnostic instruments or heavy industrial specialty tools are required. This is a general electrician hand tool kit, not a substitute for arc-rated PPE, insulated tools for energized work, or application-specific testing equipment.
Best for
Best for residential, commercial and light industrial electrical work where a technician needs a practical starter set or service pouch. It also suits van stock, maintenance departments and apprentice programs that need a bundled hand tool solution.
Installed in
Typically carried on service calls, renovation jobs, tenant fit-ups, panel work, device replacement, conduit rough-in and general troubleshooting. The included 25 ft (7.6 m) tape measure supports common layout tasks on site.
Why this product exists
This kit exists to give electricians a single part number for a core set of frequently used tools in a leather pouch. That simplifies purchasing, onboarding and replenishment when compared with sourcing each tool individually.
Compared with similar products
Compared with smaller electrician kits, this set adds a broader mix of hand tools and includes a leather pouch for immediate carry. Compared with building a custom pouch from individual tools, a pre-packed kit can be a practical choice for starter setups and fleet standardization, though experienced electricians may still add trade-specific tools based on the work they do most often.
Typical buying guidance: bundled kits like this are commonly chosen for apprentice issue, service vehicles and maintenance departments because they cover the most-used hand tool categories in one package. Actual suitability depends on the installation type, voltage class and local code requirements.
Specifications
- Manufacturer part number: 35-800
- Brand: IDEAL Industries
- Product type: Electrician tool kit with pouch
- Kit size: 16 pieces
- Pouch included: Yes, Tuff-Tote leather tool pouch
- Included pliers: 5 dipped-grip pliers
- Included wire stripper: T-5 T-Stripper, model 45-120
- Included screwdrivers: 2 cushioned-grip screwdrivers
- Included conduit tool: Twist-a-Nut conduit deburring tool
- Included hammer: Electrician's hammer
- Included tape measure: 25 ft (7.6 m) Auto-Lock tape measure
- Included knife: Electrician's knife
- Included tester: Voltage/continuity tester with replacement battery
- Included multi-driver: 7-in-1 Twist-a-Nut screwdriver/nut driver
- Typical applications: Residential, commercial and light industrial electrical work
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.