Cable Cutter · 9-1/2 in (241 mm) · Cuts up to 2/0 Cu and 4/0 Al · IDEAL Industries 35-052
35-052
72
– Loyalty Rewards
Diagonal-Cutting Pliers · 8 in · Angled Head · IDEAL 35-3029
8 in diagonal-cutting pliers with an angled head for access in tight panels, boxes, and wiring spaces. Smart-Grip handles and high-leverage forged steel construction make them a practical choice for cutting copper and aluminium conductors, cable ties, and general electrical wire work.
What this product is for
These 8 in (203 mm) diagonal-cutting pliers are made for electricians and maintenance trades who need clean wire cuts and better access in confined spaces. The angled head helps when working inside panels, device boxes, troughs, and other tight electrical enclosures.
Use for
Use for cutting copper and aluminium wire, trimming cable ties, and general-purpose electrical cutting tasks. The high-leverage design is commonly chosen when you want more cutting force from a compact 8 in hand tool.
Avoid for
Avoid using these pliers as an insulated live-line tool unless the tool is specifically marked for insulated electrical work. They are also not the right choice for heavy hardened materials beyond the tool's intended cutting range.
Best for
Best for electricians, contractors, and service technicians who want an angled-head side cutter for tighter working clearances than a standard straight-head diagonal cutter. This style is typically preferred where visibility and approach angle matter.
Installed in
Commonly used in residential, commercial, and light industrial electrical work, including panel terminations, control cabinets, junction boxes, and retrofit service calls.
Why this product exists
An angled-head diagonal cutter gives better approach to conductors and ties in cramped spaces where a straight-head plier can be awkward. For many electricians, that means faster cuts and less hand repositioning during repetitive work.
Compared with similar products
Compared with straight-head diagonal cutters, this model offers easier access in tight spaces. Compared with heavier-duty cutting pliers, it is better suited to everyday electrical wire cutting and service work rather than repeated cutting of very hard materials.
Typical guidance only: angled-head diagonal cutters are commonly used where access is limited, but actual suitability depends on conductor type, material hardness, and working clearance.
Specifications
- Manufacturer part number: 35-3029
- Brand: IDEAL
- Product type: Diagonal-cutting pliers
- Overall length: 8 in (203 mm)
- Head style: Angled head
- Handle style: Smart-Grip / cushion grip
- Construction: Forged high-carbon steel
- Design: High-leverage cutting pliers
- Application: Electrical wire cutting and general trade use
- Country of manufacture: Made in USA
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse- Edmonton Stock: 4
Square-Recess Screwdriver · #1 tip x 8 in shank · Cushioned-grip handle · IDEAL 35-692
35-692
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse22 – Loyalty Rewards- Edmonton Stock: 6
Smoke Alarm · 120V Hardwired · 10-Year Sealed Battery Backup · BRK 9120LBLA
9120LBLA
46 – Loyalty Rewards
