- Edmonton Stock: 4
:
from
to
Clear
Clear
Jab Saw · 12-1/4 in (311 mm) bi-metal blade · accepts reciprocating and hacksaw blades · IDEAL Industries 35-275
SKU: 35-275
Electrician’s jab saw with a 12-1/4 in (311 mm) replaceable bi-metal blade for drywall and wallboard cutting. The ergonomic textured grip and plunge-tip design help with cut-ins for boxes and openings, while compatibility with reciprocating and hacksaw blades adds flexibility on site.
What this product is for
This electrician’s jab saw is used for hand cutting drywall, plasterboard and similar wall materials when laying out boxes, openings and access points. It is suited to service work, renovations and finish-stage electrical rough-in where controlled hand cuts are preferred.
Use for
Use for plunge cuts in drywall, trimming wall openings, cutting around device boxes, and making small adjustments where a powered saw is unnecessary or awkward. The 12-1/4 in (311 mm) bi-metal blade is replaceable, and the frame accepts reciprocating and hacksaw blade type teeth.
Avoid for
Avoid using this saw on masonry, structural wood framing, metal stud cutting, or concealed-wall cutting where live wiring, piping or other hidden services may be present. It is intended for wallboard and similar sheet materials rather than demolition work.
Best for
Best for electricians and contractors cutting in device boxes, low-voltage openings and access holes in finished or newly installed drywall. It is also a practical choice when a hand tool offers better control than a powered oscillating or reciprocating saw.
Installed in
Commonly used in residential, commercial and institutional interior wall work, including drywall partitions, service retrofits and tenant improvements.
Why this product exists
This tool gives electricians a simple way to start and control drywall cuts without pre-drilling. The plunge-tip design helps start openings quickly, while the ergonomic textured grip improves control during repeated cut-ins.
Compared with similar products
Compared with a basic fixed drywall saw, this model uses a replaceable bi-metal blade and is designed to hold reciprocating and hacksaw blades, which can reduce tool replacement when the blade wears out. Compared with powered cutting tools, a jab saw is typically slower but offers better feel and control for small openings. Always verify what is behind the wall before plunge cutting.
Specifications
- Manufacturer: IDEAL Industries
- Manufacturer part number: 35-275
- Product type: Electrician’s jab saw
- Blade length: 12-1/4 in (311 mm)
- Blade material: Bi-metal
- Handle: Ergonomic textured non-slip grip
- Tip style: Plunge-tip design
- Compatible blade types: Reciprocating and hacksaw blade type teeth
- Typical materials cut: Drywall / plasterboard / wallboard
- Warranty: Limited lifetime
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
