Screwdriver · #2 Phillips, 6 in shaft · Cushioned-grip round shank · IDEAL 35-195
What this product is for
This manual screwdriver is used for driving and removing #2 Phillips fasteners in electrical, mechanical, and general service work. The 6 in (152 mm) shank gives added reach into panels, boxes, and equipment without moving to an extra-long driver.
Use for
- Electrical panels, control cabinets, and junction boxes
- Device and cover plate fastening where a #2 Phillips tip is required
- General contractor and maintenance service work
- Bench work where a standard fixed-blade screwdriver is preferred over a multi-bit tool
Avoid for
- Live electrical work unless a properly rated insulated screwdriver is specified
- Fasteners requiring Robertson, slotted, Torx, or square-recess tips
- High-torque impact applications
Best for
Electricians, maintenance teams, and contractors who need a standard #2 Phillips driver with more reach than a stubby or 4 in driver. A #2 Phillips is commonly used for general fastening, device hardware, and equipment screws, but actual fit depends on the fastener design.
Installed in
Typically carried in electrician hand-tool kits for residential, commercial, and light industrial service. Commonly used around panels, disconnects, cabinets, controls, and general building maintenance tasks.
Why this product exists
This screwdriver fills the need for a dedicated fixed-blade #2 Phillips driver with a 6 in (152 mm) shank, giving a practical balance of reach, tip control, and handle comfort for repeated fastening work.
Compared with similar products
Compared with shorter drivers, the 6 in shank improves access into deeper enclosures. Compared with multi-bit drivers, a fixed-blade screwdriver is typically chosen for quicker grab-and-go use and consistent tip engagement. This is a standard manual screwdriver, not an insulated or torque-rated specialty driver.
Specifications
- Manufacturer part number: 35-195
- Brand: IDEAL
- Product type: Phillips screwdriver
- Tip size: #2 Phillips
- Shank length: 6 in (152 mm)
- Overall length: approximately 10-3/8 in (264 mm)
- Shank style: Round shank
- Handle style: Cushioned grip
- Shank material: Chrome vanadium steel / steel, chrome-plated or nickel-chrome plated depending on listing terminology
- Typical application: Electrical, mechanical, and general fastening
Typical guidance only: always match the driver tip exactly to the fastener recess to reduce cam-out and tip wear.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.