Screwdriver · #2 Phillips Tip, 1 in Shank · Compact Tight-Access Driver · IDEAL Industries 35-191
What this product is for
This compact #2 Phillips screwdriver is used for fastening and service work where a standard-length driver is too long. It is suited to electrical panels, control boxes, device compartments, and other confined spaces that need a short shank for access.
Use for
- Tight-access #2 Phillips screws in panels and enclosures
- Electrical maintenance and control work
- Short-reach service calls where handle clearance is limited
- General fastening where a compact hand driver is easier to control
Avoid for
- Live electrical work requiring an insulated screwdriver
- High-torque fastening better suited to a longer shank or dedicated driver
- Fasteners that require Robertson, slotted, Torx, or combination tips
Best for
Electricians, maintenance staff, and contractors who need a short #2 Phillips driver for confined spaces. This style is commonly chosen for service kits and pouch carry where overall tool length matters.
Installed in
Typically used around panelboards, junction boxes, control cabinets, equipment housings, and similar service locations. As a rule of thumb, compact drivers like this help when door swing, wiring, or adjacent components limit hand clearance. Actual access depends on enclosure layout and installed equipment.
Why this product exists
A 1 in (25 mm) shank gives access where longer screwdrivers can be awkward or unusable. The short overall format improves manoeuvrability in crowded electrical spaces while still providing a full hand grip for controlled fastening.
Compared with similar products
Compared with a standard-length Phillips screwdriver, this model trades reach for access and control in confined spaces. It is a better fit for close-quarter panel work, but not the first choice when deeper recesses or higher torque are required. If insulated protection is required, choose a certified insulated screwdriver instead of a standard cushioned-grip model.
Specifications
- Manufacturer part number: 35-191
- Brand: IDEAL Industries
- Product type: Phillips screwdriver
- Tip size: #2 Phillips
- Shank length: 1 in (25 mm)
- Overall length: approximately 3-3/8 in (86 mm)
- Handle style: cushioned grip
- Blade material: manufacturer and distributor sources list chrome vanadium or chrome-plated steel construction
- Application: tight-access fastening and service work
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.