Hex-Key Set · 5-Piece SAE 3/16 in to 3/8 in · Folding Slip-Resistant Grip · IDEAL 35-147
35-147
23
– Loyalty Rewards
Cabinet Tip Screwdriver · 3/16 in x 10 in shank · Cushioned grip · IDEAL Industries 35-190
Cabinet tip slotted screwdriver with a 3/16 in tip and 10 in shank for reaching recessed terminal and panel screws. Nickel-chrome plated chrome vanadium steel shank and a cushioned grip help with corrosion resistance, control, and electrician service work.
What this product is for
This cabinet tip screwdriver is used for slotted fasteners where a narrow blade profile and long reach are needed. The 3/16 in tip with 10 in shank is suited to recessed screws in panels, terminal blocks, control cabinets, and junction boxes.
Use for
Use for electrical maintenance, panel work, control wiring, and general service calls where a long shank helps reach deep-set slotted screws. Commonly used by electricians, maintenance technicians, and industrial service teams.
Avoid for
Avoid using this screwdriver on Phillips, Robertson, Torx, or combination-head screws. It is also not intended to be used as an insulated live-line tool unless the tool is specifically marked and rated for that purpose.
Best for
Best for electricians who need extra reach without moving up to a wider blade. The cabinet tip profile helps access screws in tighter openings than a broader keystone-style blade.
Installed in
Typically used in electrical panels, control cabinets, switchgear compartments, terminal strips, device boxes, and equipment enclosures in residential, commercial, and industrial settings.
Why this product exists
This tool exists to give tradespeople better access to recessed slotted screws while maintaining tip fit and hand control. The long 10 in (254 mm) shank reaches farther into assemblies than standard service screwdrivers.
Compared with similar products
Compared with shorter cabinet tip screwdrivers, this model offers more reach for deep-set fasteners. Compared with wider keystone blades, the cabinet tip is better where clearance is limited. As typical trade guidance, a longer shank can improve access but may provide less turning force than a shorter heavy-duty driver in very tight fasteners.
Actual performance depends on fastener condition, access, and application.
Specifications
- Manufacturer part number: 35-190
- Brand: IDEAL Industries
- Product type: Cabinet tip screwdriver
- Tip style: Slotted / cabinet tip
- Tip size: 3/16 in (approximately 4.8 mm)
- Shank length: 10 in (254 mm)
- Overall length: 13-3/4 in (approximately 349 mm)
- Shank type: Round shank
- Shank material: Chrome vanadium steel
- Finish: Nickel-chrome plated
- Handle: Cushioned rubber grip
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory WarehouseHex-Key Set · 9-Piece Imperial 5/64 to 1/4 in · 4 in Handle with 3 in Keys · IDEAL 35-146
35-146
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse19 – Loyalty Rewards- Edmonton Stock: 40
PVC FD conduit outlet box · 1-gang deep blank · no hub, lug mount · Royal RFD
RFD
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory11 – Loyalty Rewards
