Cabinet Tip Screwdriver · 3/16 in Slotted Tip · 8 in Shank · IDEAL 35-188
What this product is for
The IDEAL 35-188 is a cabinet tip slotted screwdriver for driving recessed slotted screws where a standard flared blade can be difficult to fit. It uses a 3/16 in tip with an 8 in shank and a cushioned grip for electrical and maintenance work.
Use for
Use for terminal screws, device screws, control work, junction boxes, panels, and other deep-set slotted fasteners. The long shank helps reach screws set back from covers, barriers, or equipment fronts.
Avoid for
Avoid using it as a pry bar, chisel, or striking tool. It is also not the right choice for Phillips, Robertson, Torx, or insulated live-line work unless the job specifically allows a non-insulated slotted driver.
Best for
Best for electricians, maintenance staff, and contractors who need a dedicated slotted driver for narrow or recessed screw locations. A cabinet tip profile is typically preferred where clearance around the screw head is limited.
Installed in
Commonly carried in electrician service kits, maintenance carts, panel tool bags, and shop benches for residential, commercial, and industrial service work.
Why this product exists
This screwdriver exists to give better access to slotted screws in confined spaces. Compared with a wider keystone-style blade, the cabinet tip stays closer to the shank width, which is commonly used for recessed fasteners and tighter clearances.
Compared with similar products
Compared with shorter slotted screwdrivers, the 8 in shank gives more reach into deeper enclosures. Compared with multi-bit drivers, a dedicated fixed-blade driver is typically chosen when you want direct tip engagement and no bit change during repetitive service work.
Specifications
- Manufacturer part number: 35-188
- Brand: IDEAL
- Product type: Cabinet tip screwdriver
- Tip style: Slotted / cabinet tip
- Tip size: 3/16 in (approximately 4.8 mm)
- Shank length: 8 in (approximately 203 mm)
- Overall length: approximately 11-3/4 to 12-3/8 in (approximately 298 to 314 mm), depending on source listing
- Blade material: Chrome vanadium steel
- Blade finish: Nickel-chrome plating
- Handle: Cushioned rubber grip
Source listings show minor variation in published overall length. Buyers who need exact packed or overall length should confirm before ordering.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.