- Edmonton Stock: 193
- Stocking Transition · Limited Availability
Cabinet Tip Screwdriver · 3/16 in Tip x 4 in Shank · Cushioned Grip · Ideal Industries 35-184
Slotted cabinet tip screwdriver with a 3/16 in tip and 4 in shank for recessed terminal and device screws. Chrome vanadium steel shank, nickel-chrome plated finish, and a cushioned grip handle help electricians maintain control in panel, box, and general fastening work.
What this product is for
This slotted cabinet tip screwdriver is used for driving and adjusting recessed or deep-set slotted screws commonly found in electrical devices, terminal blocks, panels, and control work. The cabinet tip profile keeps the blade width close to the shank diameter for better access into narrow openings.
Use for
- Electrical panels and terminal screws
- Junction boxes and device hardware
- General slotted fasteners where a narrow cabinet tip is preferred
- Service work, maintenance, and installation tasks
Avoid for
- Live electrical work unless the task specifically allows a non-insulated tool
- Fasteners requiring an insulated or VDE-rated screwdriver
- Oversized slotted screws that need a wider blade
- Prying or chiselling applications
Best for
Electricians, maintenance technicians, and contractors who need a standard slotted cabinet tip screwdriver for control wiring, device terminations, and panel work. The 3/16 in (4.8 mm) tip and 4 in (102 mm) shank suit many common recessed screw locations without the bulk of a wider blade.
Installed in
Typically used in residential, commercial, and industrial electrical environments, including service panels, control cabinets, junction boxes, and equipment enclosures.
Why this product exists
Cabinet tip screwdrivers are made for access where a standard flared slotted blade can be awkward or too wide near the tip. This style helps reach screws set below face surfaces or inside tighter clearances while maintaining better blade alignment in the slot.
Compared with similar products
Compared with a standard keystone-style slotted screwdriver, a cabinet tip has straighter blade sides for easier entry into recessed screws. Compared with insulated drivers, this model is better suited to general fastening and adjustment where insulation rating is not required. Typical buying guidance: choose the blade width to match the screw slot closely to reduce cam-out and screw damage. Actual fit depends on fastener design and site conditions.
Specifications
- Manufacturer part number: 35-184
- Brand: Ideal Industries
- Product type: Slotted cabinet tip screwdriver
- Tip size: 3/16 in (4.8 mm)
- Shank length: 4 in (102 mm)
- Overall length: 7-3/4 in (197 mm)
- Tip type: Cabinet
- Handle type: Cushioned grip
- Blade material: Chrome vanadium steel
- Blade finish: Nickel-chrome plating
- Key features: Cross-ground tip, blade tip matches shank diameter, corrosion-resistant plated shank
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
