Square-Recess Screwdriver · #1 tip x 8 in shank · Cushioned-grip handle · IDEAL 35-692
35-692
22
– Loyalty Rewards
Cabinet Tip Screwdriver · 3/16 in Tip x 3 in Shank · Cushioned Grip · IDEAL Industries 35-183
Cabinet tip slotted screwdriver with a 3/16 in tip and 3 in shank for terminal screws, device work, and other recessed slotted fasteners. The cushioned grip and chrome/nickel-plated chrome vanadium steel blade are suited to everyday electrical service and panel work.
What this product is for
The IDEAL Industries 35-183 is a cabinet tip slotted screwdriver for electrical and maintenance work where a narrow blade profile helps reach recessed or closely spaced slotted screws. It is commonly used on terminals, devices, panels, and control components.
Use for
Use for slotted fasteners that need a 3/16 in tip and a 3 in shank, especially where a cabinet tip fits better than a wider keystone blade. Suitable for electricians, maintenance staff, and contractors working in residential, commercial, and light industrial settings.
Avoid for
Avoid using this screwdriver as a pry bar, chisel, or on fasteners that require an insulated or VDE-rated tool. It is also not the right choice for Phillips, Robertson, Torx, or damaged screw heads.
Best for
Best for precise hand tightening and loosening of slotted screws in tighter spaces, including terminal blocks, device screws, and electrical assemblies where blade width matters.
Installed in
Typically used in electrical panels, junction boxes, control cabinets, switchgear-related service work, and general electrical rough-in or maintenance kits.
Why this product exists
This cabinet tip pattern is made for access and control. Compared with a wider slotted blade, the narrower cabinet tip can help reach screws set deeper into devices or surrounded by hardware, while the cushioned handle improves grip during repeated service work.
Compared with similar products
Compared with a longer cabinet tip screwdriver, this 3 in shank length gives more control in tighter working areas. Compared with a keystone tip, the cabinet tip is narrower near the end for better access to recessed slotted screws. As typical trade guidance, shorter shank screwdrivers are commonly chosen where clearance is limited, while longer shanks help reach deeper-set hardware. Actual fit depends on screw geometry and working space.
Specifications
- Manufacturer part number: 35-183
- Brand: IDEAL Industries
- Product type: Cabinet tip screwdriver
- Tip type: Slotted cabinet tip
- Tip size: 3/16 in (approximately 4.8 mm)
- Shank length: 3 in (approximately 76 mm)
- Overall length: 6-3/4 in (approximately 171 mm)
- Blade material: Chrome vanadium steel
- Blade finish: Nickel-chrome / polished chrome-nickel plating
- Handle: Cushioned grip
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory WarehouseSquare Recess Screwdriver · #2 tip x 8 in shank · Cushioned grip · IDEAL 35-694
35-694
Available to Order | Typically Arrives in 1 - 3 Weeks From Ontario Factory Warehouse24 – Loyalty Rewards- Edmonton Stock: 1379
- Edmonton Stock: 40
- Stocking Transition · Limited Availability
- Edmonton Stock: 918
