Foam Conduit Carrier · 2-1/2 in Conduit Size · For Cleaning and Pull Line Installation · IDEAL Industries 31-322
What this product is for
The IDEAL Industries 31-322 is a foam conduit carrier sized for 2-1/2 in conduit. It is used to travel through the conduit with a vacuum or blower so electricians can clear loose dust, moisture, and light debris, or install a pull line ahead of wire pulling.
Use for
- Cleaning 2-1/2 in conduit before pulling conductors
- Installing a pull line through empty conduit runs
- Checking that a conduit path is open before a cable pull
- Commercial, industrial, and larger residential conduit work
Avoid for
- Removing heavy blockages or hardened obstructions
- Using in conduit smaller or larger than 2-1/2 in
- Replacing proper rodding, mandrelling, or mechanical cleaning where the run is damaged
Best for
Best for electricians and contractors preparing longer conduit runs where a pull line needs to be installed quickly and the raceway should be cleared before conductors are pulled. It is also useful where bends or longer distances make hand-feeding line less practical.
Installed in
Used in 2-1/2 in trade size conduit systems, approximately 63.5 mm, in electrical raceways for commercial buildings, industrial facilities, service work, and infrastructure projects.
Why this product exists
This foam carrier gives contractors a simple way to move a line through conduit using airflow instead of manually fishing the full run. A clean conduit path can help reduce friction and avoid wasted time during conductor installation.
Typical guidance only: clearing the raceway and installing a proper pull line before the main pull can improve pulling efficiency on longer runs. Actual results depend on conduit condition, bends, moisture, lubricant, and installation method.
Compared with similar products
Compared with improvised swabs or undersized carriers, a conduit-size-matched foam carrier is typically a better choice for moving consistently through the raceway and carrying a line. This 31-322 model is specifically matched to 2-1/2 in conduit, which matters when selecting the correct carrier for airflow and fit.
Specifications
- Manufacturer: IDEAL Industries
- Part number: 31-322
- Product type: Foam conduit carrier
- Conduit size: 2-1/2 in (63.5 mm)
- Application: Conduit cleaning and pull line installation
- Use method: Typically used with a vacuum or blower system
- Packaging: 1 per bag
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.