- Edmonton Stock: 16
Plug-In Circuit Breaker · 15A 1-Pole 120/240V · 10 kAIC Type QP · Siemens Q115
Siemens Q115 is a 15A, 1-pole plug-in circuit breaker with a 10 kAIC interrupting rating for Siemens loadcentres and other listed Type QP applications. Commonly used on 120V branch circuits for lighting and receptacle loads; as typical guidance, 15A circuits are paired with #14 AWG copper where permitted by code.
Delivered to you by May 21 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
The Siemens Q115 is a 1-pole plug-in thermal-magnetic circuit breaker used to protect branch circuits from overloads and short circuits in compatible Siemens loadcentres and other listed Type QP panel applications. It is rated 15A with a 10 kAIC interrupting capacity and is commonly applied on 120V circuits, with 120/240V system compatibility as listed by distributors.
Use for
Use for residential and light commercial branch circuits serving lighting, general receptacles, and similar 15A loads in panels listed for Siemens Type QP breakers. Typical trade guidance is 15A circuits with #14 AWG copper conductors where permitted by local code and the equipment rating.
Avoid for
Avoid using this breaker where the panel label does not list Siemens Type QP breakers, where a 2-pole breaker is required, or where GFCI, AFCI, or dual-function protection is required. Do not use it as a substitute for tandem, bolt-on, or specialty breaker types.
Best for
Best for service work, panel maintenance, and standard branch-circuit additions where you need a common 15A Siemens plug-in breaker with a 1 in (25 mm) pole width and 10 kAIC rating.
Installed in
Installed in compatible Siemens loadcentres and panelboards that accept Type QP plug-in breakers. Always confirm breaker type and circuiting from the panel directory and manufacturer labelling before installation.
Why this product exists
This breaker provides standard branch-circuit protection in a compact plug-in format that speeds replacement and new circuit installation in listed Siemens panels. It is intended for everyday overcurrent protection rather than ground-fault or arc-fault protection.
Compared with similar products
Compared with GFCI, AFCI, or dual-function breakers, the Q115 is a standard thermal-magnetic breaker for basic overcurrent protection only. Compared with 20A models, it is typically selected for lighter branch circuits. Actual conductor sizing, load calculation, and breaker selection depend on installation conditions, equipment labelling, and local electrical code.
Specifications
- Manufacturer part number: Q115
- Brand: Siemens
- Breaker type: Type QP plug-in circuit breaker
- Pole configuration: 1-pole
- Ampere rating: 15A
- Voltage rating: 120/240V AC
- Interrupting rating: 10 kAIC
- Mounting: Plug-in / plug-on
- Protection type: Thermal-magnetic overcurrent protection
- Typical breaker width: 1 in (25 mm) per pole
- Typical applications: Lighting and general-purpose branch circuits
- Package Qty6
- PackagingCarton
- BrandSiemens Breakers
- Warranty5 year
- Electrical
- Short circuit breaking rating10kA
- Compliant with standard(s)CSA
- Poles1 Pole
- Amps15A
- Voltage120
- Interrupt Rating (AIC)10
- Physical
- MountingPush on
- Breaker TypeStandard
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 7
- Edmonton Stock: 6
- Edmonton Stock: 36
- Edmonton Stock: 5
- Edmonton Stock: 5
