Tandem Circuit Breaker · 15/20A · Plug-In Duplex for Eaton BR Loadcentres · Eaton DNPL1520
What this product is for
The Eaton DNPL1520 is a plug-in tandem duplex circuit breaker used to add two single-pole branch circuits in one breaker space in compatible Eaton BR-family residential and light commercial loadcentres. It provides one 15A circuit and one 20A circuit at 120/240V AC system rating with a 10 kA interrupt rating.
Use for
Use for approved Eaton, Cutler-Hammer, Bryant, Westinghouse, Challenger and Novaline loadcentres where the panel label permits Type DNPL tandem breakers. This breaker is commonly selected when a panel has limited space and you need one 15A circuit and one 20A circuit in a single stab position.
Avoid for
Avoid using this breaker in panels that do not specifically accept tandem breakers, or where the panel directory and bus design do not permit Type DNPL devices. Do not use it as a substitute for a 2-pole common-trip breaker or where branch circuit requirements call for AFCI, GFCI, or other specialty protection not provided by this standard thermal-magnetic breaker.
Best for
Best for service upgrades, renovation work, and residential panel reconfiguration where approved tandem positions are available. It is a practical choice for electricians who need to free panel space without replacing the loadcentre.
Installed in
Installed in compatible Eaton BR / DNPL plug-in loadcentres used in residential and light commercial applications. The breaker body is approximately 3 in x 1 in x 3 in (76 x 25 x 76 mm).
Why this product exists
This breaker exists to provide two independent single-pole circuits in the footprint of one standard breaker space. For buying guidance, a typical 15A branch circuit is paired with #14 AWG copper and a typical 20A branch circuit with #12 AWG copper, subject to local code and application. Actual circuit design depends on conductor type, termination ratings, load characteristics, and the approved panel schedule.
Compared with similar products
Compared with a full-size single-pole breaker, the DNPL1520 lets you add two circuits in one space. Compared with equal-amp tandems such as 15/15A or 20/20A models, this version is useful when the panel schedule calls for mixed 15A and 20A branch circuits. It is not the same as a quad breaker and does not provide a tied 2-pole load.
Specifications
- Manufacturer: Eaton
- Manufacturer part number: DNPL1520
- Breaker type: Tandem duplex, plug-in
- Family: Type DNPL / BR-family compatible application
- Circuits: 2 single-pole circuits
- Amperage: 15A and 20A
- Voltage rating: 120/240V AC
- Interrupt rating: 10 kA
- Poles: 1-pole tandem format
- Mounting: Plug-in
- Application: Residential and light commercial
- Approvals: CSA approved; HACR listed in Eaton catalogue
- Approximate dimensions: 3 in L x 1 in W x 3 in H (76 x 25 x 76 mm)
Panel acceptance varies by loadcentre model and position. Always verify the panel label, breaker type, and local electrical code before installation.
- BrandEaton Cutler Hammer
- Warranty5 year
- Electrical
- PolesTandem
- Amps15A-20A
- Physical
- MountingPush on
- Breaker TypeStandard
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 3 Weeks From Western Canada Warehouse15 – Loyalty Rewards
Circuit Breaker · 2-Pole 15A 120/240V · Plug-On Type BR · Eaton BR215
BR215
Available to Order | Typically Arrives in 1 - 3 Weeks From Western Canada Warehouse38 – Loyalty RewardsQuadplex Circuit Breaker · 15A 1P/15A 2P/15A 1P · 120/240V AC plug-in thermal-magnetic · Eaton DNPL151515
DNPL151515
Available to Order | Typically Arrives in 1 - 3 Weeks From Western Canada Warehouse79 – Loyalty Rewards- Edmonton Stock: 26
Tandem Circuit Breaker · 20/20A · Plug-In Duplex Thermal-Magnetic · Eaton DNPL2020
DNPL2020
Available to Order | Typically Arrives in 1 - 3 Weeks From Western Canada Warehouse24 – Loyalty Rewards










