Air Circuit Breaker · 600A, 2500A Frame, 4-Pole, Drawout, Horizontal Connection, 85kA at 480VAC · UL 1066 / CSA Certified · Noark Electrical A25R4DH600
What this product is for
The Noark Electrical A25R4DH600 is a low-voltage air circuit breaker for commercial, industrial, OEM, and switchgear power distribution systems. It is a 600A breaker in the A25 family, built on a 2500A frame with 4 poles, drawout mounting, and rear horizontal connection.
Use for
Use for main, tie, or feeder protection in switchboards and switchgear where a 4-pole air circuit breaker is specified. It is commonly selected where drawout construction helps reduce service time, supports maintenance access, or allows breaker replacement without disturbing fixed bus connections.
Avoid for
Avoid for small panelboards, branch circuit applications, or installations that require a moulded case breaker instead of a power air circuit breaker. Also avoid where fixed mounting or vertical rear connection is specifically required, as this model is drawout with horizontal connection.
Best for
Best for larger distribution equipment where high available fault current and maintainability are key buying factors. Electricians and switchgear builders typically choose this style when they need a serviceable 600A breaker within a larger 2500A frame platform and a 4-pole configuration for system design requirements.
Installed in
Typically installed in low-voltage switchgear lineups, power distribution assemblies, industrial plants, commercial buildings, infrastructure projects, and OEM equipment. Drawout air circuit breakers are commonly used where uptime and maintenance access matter.
Why this product exists
This breaker provides high interrupting capacity and serviceable drawout construction for larger power systems that exceed the practical range of smaller breaker formats. The 2500A frame platform also supports standardization across equipment designs while allowing a 600A rating in the same family.
Compared with similar products
Compared with a fixed-mounted air circuit breaker, a drawout unit can simplify inspection, testing, and replacement. Compared with smaller moulded case breakers, this air circuit breaker format is intended for larger switchgear applications with higher fault-duty requirements. As typical buying guidance, a 600A breaker is commonly considered for substantial feeder or main distribution sections, but actual selection depends on calculated load, coordination study, available fault current, and local electrical code.
Actual performance and suitability depend on system design, protective settings, available fault current, installation conditions, and local electrical code.
Specifications
- Manufacturer: Noark Electrical
- Manufacturer part number: A25R4DH600
- Product family: A25 Series Power Circuit Breaker
- Product type: Air circuit breaker
- Amperage rating: 600A
- Frame size: 2500A
- Poles: 4-pole
- Mounting type: Drawout
- Connection type: Rear horizontal connection
- Interrupting capacity: 85kA at 480VAC class / 508VAC maximum family rating reference
- Standards: UL 1066, CSA C22.2 No. 31
- Application: Low-voltage power distribution
- BrandNoark Electrical
- Warranty5 year
- Electrical
- Short circuit breaking rating85kA (254-508Vac)
- Compliant with standard(s)UL1066
UL1066 (low-voltage AC and DC power circuit breakers)
CSA C22.2 No.31
ANSI C37.13 (low-voltage power circuit breakers)
ANSI C37.16 (low-voltage power circuit breakers ratings; related requirements and applications)
ANSI C37.17 (IEEE standard for trip systems)
ANSI C37.50 (low-voltage AC power circuit breakers; test procedure) - DimensionsH460mm x W452mm x D430mm
H18.113" x W17.8" x D16.93" - Electrical durability(635Vac) 600 hours
(847Vac) 300 hours - Mechanical durability10000 hours
- Poles4 Pole
- Amps600 Amp
- Voltage800Vac (50/60Hz)
- Physical
- Enclosure DimensionsH20.87" x W21.46" x D18.31"
- MountingDrawout Horizontal
- Breaker TypeAir Circuit Breaker
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.




