- Edmonton Stock: 11
Strap-Type Connector · 2 in KO · Two-Screw for Round Non-Metallic Cable · Bridgeport Fittings 666-DC2
2 in strap-type connector for terminating single round non-metallic or service entrance cable to a box or enclosure. Die cast zinc body with two-screw strap design fits 1.75 to 1.95 in cable openings and is commonly selected where a larger round cable needs a secure mechanical clamp.
Delivered to you by Jun 11 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 2 in strap-type connector is used to connect a single round non-metallic or service entrance cable to an electrical box or enclosure. It is a trade-grade fitting for larger round cable entries where a secure clamp and listed connector are required.
Use for
Use for terminating round non-metallic cable with an outside diameter of 1.75 to 1.95 in (approximately 44 to 50 mm) into a 2 in knockout. Common applications include service entrance cable terminations and other box or enclosure entries using large round cable.
Avoid for
Avoid using this connector for armoured cable, BX/AC cable, or cable sizes outside the listed diameter range. Do not use it where a raintight connector or a different cable-specific fitting is required by the installation conditions or local electrical code.
Best for
Best for electricians and contractors who need a two-screw strap connector for a 2 in knockout and larger round cable. The two-screw design helps provide even clamping pressure and a secure mechanical hold at the enclosure entry.
Installed in
Typically installed in panels, meter bases, junction boxes, pull boxes, and other enclosures with a 2 in trade-size opening. Suitable for indoor applications and other locations where the fitting type matches the cable and enclosure requirements.
Why this product exists
This connector exists to secure and protect a large round cable as it enters an enclosure while matching a standard 2 in knockout. Compared with improvised entries, a listed connector helps provide a cleaner, code-aligned cable termination and better strain control at the box wall.
Compared with similar products
Compared with squeeze connectors or smaller NM fittings, this model is built for larger round cable and uses a strap-style two-screw clamp. Compared with armoured cable connectors, it is intended for non-metallic or round service entrance cable rather than AC/BX cable. As typical guidance, matching the connector to both knockout size and actual cable outside diameter is the key buying decision. Actual fit depends on cable construction, jacket thickness, and local electrical code.
Specifications
- Manufacturer: Bridgeport Fittings
- Manufacturer part number: 666-DC2
- Product type: Strap-type connector, two-screw
- Trade size / knockout size: 2 in
- Cable range: 1.75 to 1.95 in OD (approximately 44 to 50 mm)
- Application: Single round non-metallic or service entrance cable to box or enclosure
- Material: Die cast zinc
- Finish: Ball burnished / mirror smooth
- Angle: 180° straight
- Overall length: 3-5/32 in (approximately 81 mm)
- Throat diameter: 2-1/16 in (approximately 52 mm)
- Approvals: UL 514B listed, RoHS compliant
- TypeStraight
- Number of Screws2 Screw Connector
- Trade Size2"
- ApplicationDry
- BrandBridgeport Electrical Fittings
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 22
- Edmonton Stock: 12
- Stock in BC
Meter Socket · 200A 120/240V 1-Phase 4-Jaw · Overhead/Underground BC Hydro Accepted · Hydel EK400ROBC
EK400ROBC
191 In British Columbia Warehouse As Of June 6, 2026194 – Loyalty Rewards- Edmonton Stock: 20
