Pull Elbow · 1 in EMT to Box · 90° Zinc Die-Cast with Removable Cover · Bridgeport Fittings PEEB100
What this product is for
This 1 in pull elbow is used to connect EMT conduit to a box or enclosure at a 90° turn while maintaining access for conductor pulling. It is commonly selected where a standard bend would make pulling difficult or where space is limited.
Use for
Use for 1 in EMT runs entering metal boxes, cabinets, or enclosures in commercial, industrial, and residential work. Suitable where electricians need a compact 90° change of direction and a removable cover for access during installation or future servicing.
Avoid for
Avoid using this fitting where a raintight or specifically wet-location-rated fitting is required unless the full assembly is approved for that environment. Also avoid where the raceway method or enclosure type requires a different connector style or sealing method.
Best for
Best for exposed EMT runs, panel and enclosure entries, and retrofit work where wall or ceiling space is tight. It is also a practical choice when conductors need to be pulled through a 90° turn instead of forcing a difficult bend.
Installed in
Typically installed in electrical rooms, service spaces, workshops, commercial tenant fit-outs, utility areas, and unfinished basements. As a rule of thumb, pull fittings are commonly chosen where access for conductor installation and future changes matters.
Why this product exists
Standard conduit bends do not always provide enough access for an efficient pull into a box. This pull elbow creates the 90° transition and adds a removable cover so conductors can be installed or serviced more easily. Actual pulling ease depends on conductor size, fill, bend layout, and local electrical code.
Compared with similar products
Compared with a standard EMT connector and field-bent conduit, a pull elbow can reduce pulling difficulty at the box entry. Compared with larger conduit bodies, it offers a compact form factor for EMT-to-box transitions. Buyers should confirm whether they need EMT-to-box, EMT-to-EMT, rigid-to-box, or raintight style fittings before ordering.
Specifications
- Trade size: 1 in (25 mm)
- Type: EMT to box pull elbow
- Angle: 90°
- Material: Zinc die-cast body
- Cover: Removable cover for conductor access
- Application: EMT conduit termination into box or enclosure
- Installation context: Indoor or protected locations unless the complete assembly is listed for more demanding environments
- Standards: Verify listing and approval requirements for the specific installation
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.



