Conduit Body Type LB · 3/4 in Threaded · Service Entrance Rated · Vista SLB075
What this product is for
This 3/4 in Type LB threaded conduit body is used on threaded rigid conduit or IMC where you need access to the raceway at a 90° turn. It is service entrance rated and commonly used to help with conductor pulling, inspection and maintenance.
Use for
- Threaded rigid conduit and IMC systems
- Service entrance raceway access points
- Wire pulling at changes in direction
- Wet location installations where a gasketed cover is required
- Wall-mounted runs where an LB layout suits the conduit direction
Avoid for
- EMT set-screw or compression connections unless the system is specifically adapted for threaded fittings
- Applications requiring a larger conductor fill than the body volume allows
- Installations where a different body style such as LL, LR or C would provide better access
Best for
Best for service entrance and exterior raceway work where electricians need a compact threaded LB body with removable cover access. It is also a practical choice when mounting close to a structure and maintaining access for future conductor work.
Installed in
Typically installed in commercial, industrial and residential service raceways, exterior wall runs, meter-to-panel conduit layouts, and other threaded conduit systems. Trade rule of thumb: conduit bodies are commonly selected to improve pull access and reduce difficulty at direction changes, but actual conductor fill and pull conditions depend on conductor type, bend layout and local electrical code.
Why this product exists
A service entrance LB conduit body provides an accessible turning point in a threaded raceway system without opening the conduit run elsewhere. The removable cover and gasket help maintain access while supporting wet-location use.
Compared with similar products
Compared with standard conduit bodies, a service entrance rated LB is intended for service-entry applications and threaded conduit systems. Compared with LL or LR bodies, the LB pattern is chosen when the back opening and conduit direction best suit the wall layout. Compared with larger trade sizes, this 3/4 in body is suited to smaller raceway runs and has a listed internal volume of 3.8 in³ (approximately 62 cm³).
Specifications
- Product type: Type LB conduit body
- Trade size: 3/4 in (19 mm)
- Connection type: 90° threaded
- Application: Service entrance rated
- Compatible raceway: Threaded rigid conduit or IMC
- Material: Aluminium die-cast body
- Cover: Removable cover with fibre gasket
- Location rating: Listed for wet locations
- Internal volume: 3.8 in³ (approximately 62 cm³)
- Approximate dimensions: A 3.57 in (90.7 mm), B 1.52 in (38.6 mm), C 1.77 in (45 mm)
- Standards referenced by source listings: UL 514B, CSA C22.2 No. 18
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.