Conduit Body · Type LR · 1-1/2 in Trade Size · Threaded Rigid/IMC Style · Global RCB/LR150
What this product is for
This 1-1/2 in Type LR conduit body is used on threaded rigid or IMC conduit systems where the raceway changes direction and access is needed for wire pulling, inspection, or maintenance. The LR pattern provides a right-angle change with the cover opening on the left when viewed from the cover side.
Use for
- Threaded rigid or IMC conduit runs
- Pull points in larger raceways
- Direction changes on commercial and industrial conduit systems
- Indoor or outdoor installations where the enclosure rating and installation method are suitable
Avoid for
- EMT installations unless the fitting is specifically listed for EMT
- Applications requiring a different body pattern such as LB, LL, C, or T
- Installations where conduit fill, bending space, or environmental rating has not been confirmed
Best for
Best for electricians and contractors working with 1-1/2 in threaded conduit who need a practical access point for pulling conductors around a 90° change in direction. As a rule of thumb, conduit bodies like this are commonly selected to reduce pulling difficulty and improve access compared with a continuous bend, but conductor count and ease of pull still depend on fill, insulation type, and layout.
Installed in
Typically installed in commercial, industrial, utility, and service raceway systems using 1-1/2 in threaded rigid metal conduit or IMC. Common locations include exposed runs, equipment feeds, service areas, and rooftop or exterior conduit where a gasketed cover is preferred.
Why this product exists
It provides an accessible point in the raceway system so conductors can be pulled, spliced where permitted, or serviced without cutting conduit. The LR body shape helps route the run while maintaining access through a removable cover.
Compared with similar products
Compared with an LB body, an LR body changes direction differently and is chosen based on the direction of entry and cover access needed on site. Compared with a standard coupling and bend, a conduit body adds pulling access. Compared with EMT set-screw or compression bodies, this style is aligned with threaded rigid/IMC applications.
Specifications
- Product type: Conduit body
- Pattern: LR
- Trade size: 1-1/2 in
- Metric equivalent: approximately 41 mm trade size
- Conduit compatibility: Threaded rigid/IMC style
- Material: Cast aluminium
- Cover: Included
- Gasket: Included
- Typical application: Pulling access and direction change in conduit runs
- Typical dimensions for comparable 1-1/2 in LR bodies: about 7.8 in L x 3.5 in W x 2.5 in H (approximately 198 x 89 x 64 mm). Actual dimensions may vary by manufacturer.
- Installation note: Confirm conductor fill, bending space, and environmental requirements before ordering.
Actual performance depends on installation conditions, conductor insulation, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.