- Edmonton Stock: 12
:
from
to
Clear
Clear
LB Conduit Body · 2 in Hub · EMT Set Screw 90° Back Access · Bridgeport Fittings LB-36
SKU: LB-2
2 in LB conduit body for EMT runs with a set screw connection and back access cover for wire pulling, inspection, and maintenance. Commonly used where a 90° change of direction is needed while keeping conductor access available in commercial and industrial conduit systems.
Delivered to you by Sep 20 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 2 in LB conduit body is used to change direction 90° in an EMT raceway while providing access to conductors for pulling, inspection, and maintenance. It is a set screw style EMT conduit body with a back access opening and removable cover.
Use for
Use for 2 in EMT conduit runs in commercial, industrial, and service-entry style raceway layouts where you need a compact directional change and future access to the conductors. It is commonly used where straight conduit bends would make pulling more difficult.
Avoid for
Avoid using this as a substitute for a junction box where box fill, device mounting, or application requirements call for a box. Also avoid assuming EMT and threaded rigid compatibility unless the exact combination body version is specified for both raceway types.
Best for
Best for electricians and contractors needing a 2 in aluminum LB body for EMT with a set screw connection, removable cover access, and a 90° back outlet configuration.
Installed in
Typically installed in exposed conduit systems in commercial buildings, industrial facilities, utility areas, and service raceway runs. The body measures approximately 10-3/16 in long (259 mm) and uses 2 in hubs.
Why this product exists
An LB conduit body gives access where a standard bend alone would not. This helps with conductor pulling and future maintenance without opening a larger enclosure. As a rule of thumb, conduit bodies are commonly chosen to improve pull access and reduce difficulty on direction changes, but actual installation suitability depends on conductor size, fill, layout, and local electrical code.
Compared with similar products
Compared with threaded rigid or IMC LB bodies, this version is intended for EMT using set screw hubs. Compared with a standard elbow, it adds a removable cover for access. If the job requires EMT-to-threaded rigid compatibility in one body, verify that a combination EMT/rigid model is specified rather than a standard EMT set screw body.
Specifications
- Product type: Type LB conduit body
- Trade size: 2 in
- Conduit type: EMT
- Connection type: Set screw
- Configuration: 90° LB, back access opening
- Material: Aluminum
- Number of hubs: 2
- Overall length: 10-3/16 in (approximately 259 mm)
- Standards: UL 514A
- Typical use: Access for pulling, inspection, and maintenance of conductors
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 2
- Stock Hydel BC Warehouse
Meter Hub · 2 in · Interchangeable for 2-1/2 in Hub Opening · Hydel SXC200
SXC200
33 – Loyalty Rewards- Edmonton Stock: 6
- Edmonton Stock: 17
