- Edmonton Stock: 500
:
from
to
Clear
Clear
LB conduit body · 1/2 in EMT · set-screw aluminium body for 90° access · Bridgeport Fittings LB-31
SKU: LB-1/2
1/2 in EMT type LB conduit body for a 90° change of direction with pull access for wire installation, inspection, and maintenance. Set-screw aluminium body for EMT conduit; cover and gasket should be confirmed separately for this exact part number.
What this product is for
This 1/2 in EMT type LB conduit body is used where an EMT run needs a 90° change in direction and an accessible opening for pulling conductors. It is commonly installed at wall entries, service transitions, and other points where future access is useful.
Use for
Use with 1/2 in EMT in commercial, industrial, and residential electrical installations. The set-screw connection is intended for EMT, and the removable cover opening provides access for conductor pulling and inspection.
Avoid for
Do not use this fitting as a substitute for a junction box where box fill, splicing space, or device mounting is required. Avoid using EMT set-screw conduit bodies on conduit types they are not listed for.
Best for
Best for exposed EMT runs where you need a compact 90° body with serviceable access. This style is commonly chosen when a standard bend would make pulling more difficult or when future maintenance access is important.
Installed in
Typically installed in surface-mounted EMT systems in shops, utility areas, mechanical rooms, basements, and light commercial spaces. When used in damp or outdoor locations, use the correct cover, gasket, and sealing method required by the installation.
Why this product exists
An LB conduit body gives electricians a practical access point at a 90° turn without opening up the conduit run elsewhere. It helps simplify conductor pulling and can reduce labour on tighter routing layouts.
Compared with similar products
Compared with a standard EMT elbow, an LB body adds access for pulling and inspection. Compared with combination conduit bodies, this set-screw style is intended specifically for EMT rather than mixed EMT and threaded rigid/IMC applications. As typical trade guidance, conduit bodies are selected for access and routing convenience, but actual conductor capacity depends on conductor size, insulation, and code requirements.
Actual performance depends on installation conditions, conductor fill, layout, and local electrical code.
Specifications
- Product type: Type LB conduit body
- Trade size: 1/2 in
- Metric equivalent: approximately 16 mm trade size
- Conduit type: EMT
- Connection type: Set-screw
- Configuration: LB, 90° back opening access
- Material: Aluminium, die-cast / copper-free aluminium based on manufacturer and distributor references
- Typical dimensions from comparable 1/2 in LB listing: approximately 4.4 in L x 2.1 in H (112 mm x 53 mm)
- Certification references found in market listings: UL Listed; CSA referenced on comparable distributor listing
- Brand: Bridgeport Fittings
- Manufacturer part number: LB-31
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 20
ENT to EMT Adapter · 3/4 in Trade Size · PVC Set-Screw Transition Coupling · Royal RKTC15
RKTC15
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory2 – Loyalty RewardsPVC Type LB Access Fitting · 1/2 in Hub · Rigid PVC Conduit Body · Royal RSLB10S
RSLB10S
Available to Order | Typically Arrives in 1 - 3 Weeks Ships from Abbotsford BC Factory4 – Loyalty Rewards
